<< Back to man.ChinaUnix.net

Go to the first, previous, next, last section, table of contents.


12 Functions and Operators

Expressions can be used at several points in SQL statements, such as in the ORDER BY or HAVING clauses of SELECT statements, in the WHERE clause of a SELECT, DELETE, or UPDATE statement, or in SET statements. Expressions can be written using literal values, column values, NULL, functions, and operators. This chapter describes the functions and operators that are allowed for writing expressions in MySQL.

An expression that contains NULL always produces a NULL value unless otherwise indicated in the documentation for a particular function or operator.

Note: By default, there must be no whitespace between a function name and the parenthesis following it. This helps the MySQL parser distinguish between function calls and references to tables or columns that happen to have the same name as a function. Spaces around function arguments are permitted, though.

You can tell the MySQL server to accept spaces after function names by starting it with the --sql-mode=IGNORE_SPACE option. Individual client programs can request this behavior by using the CLIENT_IGNORE_SPACE option for mysql_real_connect(). In either case, all function names will become reserved words. See section 5.2.2 The Server SQL Mode.

For the sake of brevity, most examples in this chapter display the output from the mysql program in abbreviated form. Instead of showing examples in this format:

mysql> SELECT MOD(29,9);
+-----------+
| mod(29,9) |
+-----------+
|         2 |
+-----------+
1 rows in set (0.00 sec)

This format is used instead:

mysql> SELECT MOD(29,9);
        -> 2

12.1 Operators

12.1.1 Operator Precedence

Operator precedences are shown in the following list, from lowest precedence to the highest. Operators that are shown together on a line have the same precedence.

:=
||, OR, XOR
&&, AND
NOT
BETWEEN, CASE, WHEN, THEN, ELSE
=, <=>, >=, >, <=, <, <>, !=, IS, LIKE, REGEXP, IN
|
&
<<, >>
-, +
*, /, DIV, %, MOD
^
- (unary minus), ~ (unary bit inversion)
!
BINARY, COLLATE

The precedence shown for NOT is as of MySQL 5.0.2. For earlier versions, or from 5.0.2 on if the HIGH_NOT_PRECEDENCE SQL mode is enabled, the precedence of NOT is the same as that of the ! operator. See section 5.2.2 The Server SQL Mode.

12.1.2 Parentheses

( ... )
Use parentheses to force the order of evaluation in an expression. For example:
mysql> SELECT 1+2*3;
        -> 7
mysql> SELECT (1+2)*3;
        -> 9

12.1.3 Comparison Functions and Operators

Comparison operations result in a value of 1 (TRUE), 0 (FALSE), or NULL. These operations work for both numbers and strings. Strings are automatically converted to numbers and numbers to strings as necessary.

Some of the functions in this section (such as LEAST() and GREATEST()) return values other than 1 (TRUE), 0 (FALSE), or NULL. However, the value they return is based on comparison operations performed as described by the following rules.

MySQL compares values using the following rules:

By default, string comparisons are not case sensitive and use the current character set (ISO-8859-1 Latin1 by default, which also works excellently for English).

To convert a value to a specific type for comparison purposes, you can use the CAST() function. String values can be converted to a different character set using CONVERT(). See section 12.7 Cast Functions and Operators.

The following examples illustrate conversion of strings to numbers for comparison operations:

mysql> SELECT 1 > '6x';
        -> 0
mysql> SELECT 7 > '6x';
        -> 1
mysql> SELECT 0 > 'x6';
        -> 0
mysql> SELECT 0 = 'x6';
        -> 1

Note that when you are comparing a string column with a number, MySQL can't use an index on the column to quickly look up the value. If str_col is an indexed string column, the index cannot be used when performing the lookup in the following statement:

SELECT * FROM tbl_name WHERE str_col=1;

The reason for this is that there are many different strings that may convert to the value 1: '1', ' 1', '1a', ...

=
Equal:
mysql> SELECT 1 = 0;
        -> 0
mysql> SELECT '0' = 0;
        -> 1
mysql> SELECT '0.0' = 0;
        -> 1
mysql> SELECT '0.01' = 0;
        -> 0
mysql> SELECT '.01' = 0.01;
        -> 1
<=>
NULL-safe equal. This operator performs an equality comparison like the = operator, but returns 1 rather than NULL if both operands are NULL, and 0 rather than NULL if one operand is NULL.
mysql> SELECT 1 <=> 1, NULL <=> NULL, 1 <=> NULL;
        -> 1, 1, 0
mysql> SELECT 1 = 1, NULL = NULL, 1 = NULL;
        -> 1, NULL, NULL
<=> was added in MySQL 3.23.0.
<>
!=
Not equal:
mysql> SELECT '.01' <> '0.01';
        -> 1
mysql> SELECT .01 <> '0.01';
        -> 0
mysql> SELECT 'zapp' <> 'zappp';
        -> 1
<=
Less than or equal:
mysql> SELECT 0.1 <= 2;
        -> 1
<
Less than:
mysql> SELECT 2 < 2;
        -> 0
>=
Greater than or equal:
mysql> SELECT 2 >= 2;
        -> 1
>
Greater than:
mysql> SELECT 2 > 2;
        -> 0
IS boolean_value
IS NOT boolean_value
Tests whether a value against a boolean value, where boolean_value can be TRUE, FALSE, or UNKNOWN.
mysql> SELECT 1 IS TRUE, 0 IS FALSE, NULL IS UNKNOWN;
        -> 1, 1, 1
mysql> SELECT 1 IS NOT UNKNOWN, 0 IS NOT UNKNOWN, NULL IS NOT UNKNOWN;
        -> 1, 1, 0
IS [NOT] boolean_value syntax was added in MySQL 5.0.2.
IS NULL
IS NOT NULL
Tests whether a value is or is not NULL.
mysql> SELECT 1 IS NULL, 0 IS NULL, NULL IS NULL;
        -> 0, 0, 1
mysql> SELECT 1 IS NOT NULL, 0 IS NOT NULL, NULL IS NOT NULL;
        -> 1, 1, 0
To be able to work well with ODBC programs, MySQL supports the following extra features when using IS NULL:
expr BETWEEN min AND max
If expr is greater than or equal to min and expr is less than or equal to max, BETWEEN returns 1, otherwise it returns 0. This is equivalent to the expression (min <= expr AND expr <= max) if all the arguments are of the same type. Otherwise type conversion takes place according to the rules described at the beginning of this section, but applied to all the three arguments. Note: Before MySQL 4.0.5, arguments were converted to the type of expr instead.
mysql> SELECT 1 BETWEEN 2 AND 3;
        -> 0
mysql> SELECT 'b' BETWEEN 'a' AND 'c';
        -> 1
mysql> SELECT 2 BETWEEN 2 AND '3';
        -> 1
mysql> SELECT 2 BETWEEN 2 AND 'x-3';
        -> 0
expr NOT BETWEEN min AND max
This is the same as NOT (expr BETWEEN min AND max).
COALESCE(value,...)
Returns the first non-NULL value in the list.
mysql> SELECT COALESCE(NULL,1);
        -> 1
mysql> SELECT COALESCE(NULL,NULL,NULL);
        -> NULL
COALESCE() was added in MySQL 3.23.3.
GREATEST(value1,value2,...)
With two or more arguments, returns the largest (maximum-valued) argument. The arguments are compared using the same rules as for LEAST().
mysql> SELECT GREATEST(2,0);
        -> 2
mysql> SELECT GREATEST(34.0,3.0,5.0,767.0);
        -> 767.0
mysql> SELECT GREATEST('B','A','C');
        -> 'C'
Before MySQL 3.22.5, you can use MAX() instead of GREATEST().
expr IN (value,...)
Returns 1 if expr is any of the values in the IN list, else returns 0. If all values are constants, they are evaluated according to the type of expr and sorted. The search for the item then is done using a binary search. This means IN is very quick if the IN value list consists entirely of constants. If expr is a case-sensitive string expression, the string comparison is performed in case-sensitive fashion.
mysql> SELECT 2 IN (0,3,5,'wefwf');
        -> 0
mysql> SELECT 'wefwf' IN (0,3,5,'wefwf');
        -> 1
The number of values in the IN list is only limited by the max_allowed_packet value. To comply with the SQL standard, from MySQL 4.1 on IN returns NULL not only if the expression on the left hand side is NULL, but also if no match is found in the list and one of the expressions in the list is NULL. From MySQL 4.1 on, IN() syntax also is used to write certain types of subqueries. See section 13.1.8.3 Subqueries with ANY, IN, and SOME.
expr NOT IN (value,...)
This is the same as NOT (expr IN (value,...)).
ISNULL(expr)
If expr is NULL, ISNULL() returns 1, otherwise it returns 0.
mysql> SELECT ISNULL(1+1);
        -> 0
mysql> SELECT ISNULL(1/0);
        -> 1
Note that a comparison of NULL values using = will always be false!
INTERVAL(N,N1,N2,N3,...)
Returns 0 if N < N1, 1 if N < N2 and so on or -1 if N is NULL. All arguments are treated as integers. It is required that N1 < N2 < N3 < ... < Nn for this function to work correctly. This is because a binary search is used (very fast).
mysql> SELECT INTERVAL(23, 1, 15, 17, 30, 44, 200);
        -> 3
mysql> SELECT INTERVAL(10, 1, 10, 100, 1000);
        -> 2
mysql> SELECT INTERVAL(22, 23, 30, 44, 200);
        -> 0
LEAST(value1,value2,...)
With two or more arguments, returns the smallest (minimum-valued) argument. The arguments are compared using the following rules.
mysql> SELECT LEAST(2,0);
        -> 0
mysql> SELECT LEAST(34.0,3.0,5.0,767.0);
        -> 3.0
mysql> SELECT LEAST('B','A','C');
        -> 'A'
Before MySQL 3.22.5, you can use MIN() instead of LEAST(). Note that the preceding conversion rules can produce strange results in some borderline cases:
mysql> SELECT CAST(LEAST(3600, 9223372036854775808.0) as SIGNED);
        -> -9223372036854775808
This happens because MySQL reads 9223372036854775808.0 in an integer context. The integer representation is not good enough to hold the value, so it wraps to a signed integer.

12.1.4 Logical Operators

In SQL, all logical operators evaluate to TRUE, FALSE, or NULL (UNKNOWN). In MySQL, these are implemented as 1 (TRUE), 0 (FALSE), and NULL. Most of this is common to different SQL database servers, although some servers may return any non-zero value for TRUE.

NOT
!
Logical NOT. Evaluates to 1 if the operand is 0, to 0 if the operand is non-zero, and NOT NULL returns NULL.
mysql> SELECT NOT 10;
        -> 0
mysql> SELECT NOT 0;
        -> 1
mysql> SELECT NOT NULL;
        -> NULL
mysql> SELECT ! (1+1);
        -> 0
mysql> SELECT ! 1+1;
        -> 1
The last example produces 1 because the expression evaluates the same way as (!1)+1.
AND
&&
Logical AND. Evaluates to 1 if all operands are non-zero and not NULL, to 0 if one or more operands are 0, otherwise NULL is returned.
mysql> SELECT 1 && 1;
        -> 1
mysql> SELECT 1 && 0;
        -> 0
mysql> SELECT 1 && NULL;
        -> NULL
mysql> SELECT 0 && NULL;
        -> 0
mysql> SELECT NULL && 0;
        -> 0
Please note that MySQL versions prior to 4.0.5 stop evaluation when a NULL is encountered, rather than continuing the process to check for possible 0 values. This means that in these versions, SELECT (NULL AND 0) returns NULL instead of 0. As of MySQL 4.0.5, the code has been re-engineered so that the result is always as prescribed by the SQL standards while still using the optimization wherever possible.
OR
||
Logical OR. When both operands are non-NULL, the result is 1 if any operand is non-zero, and 0 otherwise. With a NULL operand, the result is 1 if the other operand is non-zero, and NULL otherwise. If both operands are NULL, the result is NULL.
mysql> SELECT 1 || 1;
        -> 1
mysql> SELECT 1 || 0;
        -> 1
mysql> SELECT 0 || 0;
        -> 0
mysql> SELECT 0 || NULL;
        -> NULL
mysql> SELECT 1 || NULL;
        -> 1
XOR
Logical XOR. Returns NULL if either operand is NULL. For non-NULL operands, evaluates to 1 if an odd number of operands is non-zero, otherwise 0 is returned.
mysql> SELECT 1 XOR 1;
        -> 0
mysql> SELECT 1 XOR 0;
        -> 1
mysql> SELECT 1 XOR NULL;
        -> NULL
mysql> SELECT 1 XOR 1 XOR 1;
        -> 1
a XOR b is mathematically equal to (a AND (NOT b)) OR ((NOT a) and b). XOR was added in MySQL 4.0.2.

12.2 Control Flow Functions

CASE value WHEN [compare-value] THEN result [WHEN [compare-value] THEN result ...] [ELSE result] END
CASE WHEN [condition] THEN result [WHEN [condition] THEN result ...] [ELSE result] END
The first version returns the result where value=compare-value. The second version returns the result for the first condition that is true. If there was no matching result value, the result after ELSE is returned, or NULL if there is no ELSE part.
mysql> SELECT CASE 1 WHEN 1 THEN 'one'
    ->     WHEN 2 THEN 'two' ELSE 'more' END;
        -> 'one'
mysql> SELECT CASE WHEN 1>0 THEN 'true' ELSE 'false' END;
        -> 'true'
mysql> SELECT CASE BINARY 'B'
    ->     WHEN 'a' THEN 1 WHEN 'b' THEN 2 END;
        -> NULL
The type of the return value (INTEGER, DOUBLE, or STRING) is the same as the type of the first returned value (the expression after the first THEN). CASE was added in MySQL 3.23.3.
IF(expr1,expr2,expr3)
If expr1 is TRUE (expr1 <> 0 and expr1 <> NULL) then IF() returns expr2, else it returns expr3. IF() returns a numeric or string value, depending on the context in which it is used.
mysql> SELECT IF(1>2,2,3);
        -> 3
mysql> SELECT IF(1<2,'yes','no');
        -> 'yes'
mysql> SELECT IF(STRCMP('test','test1'),'no','yes');
        -> 'no'
If only one of expr2 or expr3 is explicitly NULL, the result type of the IF() function is the type of non-NULL expression. (This behavior is new in MySQL 4.0.3.) expr1 is evaluated as an integer value, which means that if you are testing floating-point or string values, you should do so using a comparison operation.
mysql> SELECT IF(0.1,1,0);
        -> 0
mysql> SELECT IF(0.1<>0,1,0);
        -> 1
In the first case shown, IF(0.1) returns 0 because 0.1 is converted to an integer value, resulting in a test of IF(0). This may not be what you expect. In the second case, the comparison tests the original floating-point value to see whether it is non-zero. The result of the comparison is used as an integer. The default return type of IF() (which may matter when it is stored into a temporary table) is calculated in MySQL 3.23 as follows:
Expression Return Value
expr2 or expr3 returns a string string
expr2 or expr3 returns a floating-point value floating-point
expr2 or expr3 returns an integer integer
If expr2 and expr3 are strings, the result is case sensitive if either string is case sensitive (starting from MySQL 3.23.51).
IFNULL(expr1,expr2)
If expr1 is not NULL, IFNULL() returns expr1, else it returns expr2. IFNULL() returns a numeric or string value, depending on the context in which it is used.
mysql> SELECT IFNULL(1,0);
        -> 1
mysql> SELECT IFNULL(NULL,10);
        -> 10
mysql> SELECT IFNULL(1/0,10);
        -> 10
mysql> SELECT IFNULL(1/0,'yes');
        -> 'yes'
In MySQL 4.0.6 and above, the default result value of IFNULL(expr1,expr2) is the more ``general'' of the two expressions, in the order STRING, REAL, or INTEGER. The difference from earlier MySQL versions is mostly notable when you create a table based on expressions or MySQL has to internally store a value from IFNULL() in a temporary table.
CREATE TABLE tmp SELECT IFNULL(1,'test') AS test;
As of MySQL 4.0.6, the type for the test column is CHAR(4), whereas in earlier versions the type would be BIGINT.
NULLIF(expr1,expr2)
Returns NULL if expr1 = expr2 is true, else returns expr1. This is the same as CASE WHEN expr1 = expr2 THEN NULL ELSE expr1 END.
mysql> SELECT NULLIF(1,1);
        -> NULL
mysql> SELECT NULLIF(1,2);
        -> 1
Note that MySQL evaluates expr1 twice if the arguments are not equal. NULLIF() was added in MySQL 3.23.15.

12.3 String Functions

String-valued functions return NULL if the length of the result would be greater than the value of the max_allowed_packet system variable. See section 7.5.2 Tuning Server Parameters.

For functions that operate on string positions, the first position is numbered 1.

ASCII(str)
Returns the numeric value of the leftmost character of the string str. Returns 0 if str is the empty string. Returns NULL if str is NULL. ASCII() works for characters with numeric values from 0 to 255.
mysql> SELECT ASCII('2');
        -> 50
mysql> SELECT ASCII(2);
        -> 50
mysql> SELECT ASCII('dx');
        -> 100
See also the ORD() function.
BIN(N)
Returns a string representation of the binary value of N, where N is a longlong (BIGINT) number. This is equivalent to CONV(N,10,2). Returns NULL if N is NULL.
mysql> SELECT BIN(12);
        -> '1100'
BIT_LENGTH(str)
Returns the length of the string str in bits.
mysql> SELECT BIT_LENGTH('text');
        -> 32
BIT_LENGTH() was added in MySQL 4.0.2.
CHAR(N,...)
CHAR() interprets the arguments as integers and returns a string consisting of the characters given by the code values of those integers. NULL values are skipped.
mysql> SELECT CHAR(77,121,83,81,'76');
        -> 'MySQL'
mysql> SELECT CHAR(77,77.3,'77.3');
        -> 'MMM'
CHAR_LENGTH(str)
Returns the length of the string str, measured in characters. A multi-byte character counts as a single character. This means that for a string containing five two-byte characters, LENGTH() returns 10, whereas CHAR_LENGTH() returns 5.
CHARACTER_LENGTH(str)
CHARACTER_LENGTH() is a synonym for CHAR_LENGTH().
COMPRESS(string_to_compress)
Compresses a string. This function requires MySQL to have been compiled with a compression library such as zlib. Otherwise, the return value is always NULL. The compressed string can be uncompressed with UNCOMPRESS().
mysql> SELECT LENGTH(COMPRESS(REPEAT('a',1000)));
        -> 21
mysql> SELECT LENGTH(COMPRESS(''));
        -> 0
mysql> SELECT LENGTH(COMPRESS('a'));
        -> 13
mysql> SELECT LENGTH(COMPRESS(REPEAT('a',16)));
        -> 15
The compressed string contents are stored the following way: COMPRESS() was added in MySQL 4.1.1.
CONCAT(str1,str2,...)
Returns the string that results from concatenating the arguments. Returns NULL if any argument is NULL. May have one or more arguments. If all arguments are non-binary strings, the result is a non-binary string. If the arguments include any binary strings, the result is a binary string. A numeric argument is converted to its equivalent binary string form.
mysql> SELECT CONCAT('My', 'S', 'QL');
        -> 'MySQL'
mysql> SELECT CONCAT('My', NULL, 'QL');
        -> NULL
mysql> SELECT CONCAT(14.3);
        -> '14.3'
CONCAT_WS(separator,str1,str2,...)
CONCAT_WS() stands for CONCAT With Separator and is a special form of CONCAT(). The first argument is the separator for the rest of the arguments. The separator is added between the strings to be concatenated. The separator can be a string as can the rest of the arguments. If the separator is NULL, the result is NULL. The function skips any NULL values after the separator argument.
mysql> SELECT CONCAT_WS(',','First name','Second name','Last Name');
        -> 'First name,Second name,Last Name'
mysql> SELECT CONCAT_WS(',','First name',NULL,'Last Name');
        -> 'First name,Last Name'
Before MySQL 4.0.14, CONCAT_WS() skips empty strings as well as NULL values.
CONV(N,from_base,to_base)
Converts numbers between different number bases. Returns a string representation of the number N, converted from base from_base to base to_base. Returns NULL if any argument is NULL. The argument N is interpreted as an integer, but may be specified as an integer or a string. The minimum base is 2 and the maximum base is 36. If to_base is a negative number, N is regarded as a signed number. Otherwise, N is treated as unsigned. CONV() works with 64-bit precision.
mysql> SELECT CONV('a',16,2);
        -> '1010'
mysql> SELECT CONV('6E',18,8);
        -> '172'
mysql> SELECT CONV(-17,10,-18);
        -> '-H'
mysql> SELECT CONV(10+'10'+'10'+0xa,10,10);
        -> '40'
ELT(N,str1,str2,str3,...)
Returns str1 if N = 1, str2 if N = 2, and so on. Returns NULL if N is less than 1 or greater than the number of arguments. ELT() is the complement of FIELD().
mysql> SELECT ELT(1, 'ej', 'Heja', 'hej', 'foo');
        -> 'ej'
mysql> SELECT ELT(4, 'ej', 'Heja', 'hej', 'foo');
        -> 'foo'
EXPORT_SET(bits,on,off[,separator[,number_of_bits]])
Returns a string in which for every bit set in the value bits, you get an on string and for every reset bit you get an off string. Bits in bits are examined from right to left (from low-order to high-order bits). Strings are added to the result from left to right, separated by the separator string (default `,'). The number of bits examined is given by number_of_bits (default 64).
mysql> SELECT EXPORT_SET(5,'Y','N',',',4);
        -> 'Y,N,Y,N'
mysql> SELECT EXPORT_SET(6,'1','0',',',10);
        -> '0,1,1,0,0,0,0,0,0,0'
FIELD(str,str1,str2,str3,...)
Returns the index of str in the str1, str2, str3, ... list. Returns 0 if str is not found. If str is NULL, the return value is 0 because NULL fails equality comparison with any value. FIELD() is the complement of ELT().
mysql> SELECT FIELD('ej', 'Hej', 'ej', 'Heja', 'hej', 'foo');
        -> 2
mysql> SELECT FIELD('fo', 'Hej', 'ej', 'Heja', 'hej', 'foo');
        -> 0
FIND_IN_SET(str,strlist)
Returns a value 1 to N if the string str is in the string list strlist consisting of N substrings. A string list is a string composed of substrings separated by `,' characters. If the first argument is a constant string and the second is a column of type SET, the FIND_IN_SET() function is optimized to use bit arithmetic. Returns 0 if str is not in strlist or if strlist is the empty string. Returns NULL if either argument is NULL. This function will not work properly if the first argument contains a comma (`,') character.
mysql> SELECT FIND_IN_SET('b','a,b,c,d');
        -> 2
HEX(N_or_S)
If N_OR_S is a number, returns a string representation of the hexadecimal value of N, where N is a longlong (BIGINT) number. This is equivalent to CONV(N,10,16). From MySQL 4.0.1 and up, if N_OR_S is a string, returns a hexadecimal string of N_OR_S where each character in N_OR_S is converted to two hexadecimal digits.
mysql> SELECT HEX(255);
        -> 'FF'
mysql> SELECT 0x616263;
        -> 'abc'
mysql> SELECT HEX('abc');
        -> 616263
INSERT(str,pos,len,newstr)
Returns the string str, with the substring beginning at position pos and len characters long replaced by the string newstr. Returns the original string if pos is not within the length of the string. Replaces the rest of the string from position pos is len is not within the length of the rest of the string. Returns NULL if any argument is null.
mysql> SELECT INSERT('Quadratic', 3, 4, 'What');
        -> 'QuWhattic'
mysql> SELECT INSERT('Quadratic', -1, 4, 'What');
        -> 'Quadratic'
mysql> SELECT INSERT('Quadratic', 3, 100, 'What');
        -> 'QuWhat'
This function is multi-byte safe.
INSTR(str,substr)
Returns the position of the first occurrence of substring substr in string str. This is the same as the two-argument form of LOCATE(), except that the arguments are swapped.
mysql> SELECT INSTR('foobarbar', 'bar');
        -> 4
mysql> SELECT INSTR('xbar', 'foobar');
        -> 0
This function is multi-byte safe. In MySQL 3.23, this function is case sensitive. For 4.0 on, it is case sensitive only if either argument is a binary string.
LCASE(str)
LCASE() is a synonym for LOWER().
LEFT(str,len)
Returns the leftmost len characters from the string str.
mysql> SELECT LEFT('foobarbar', 5);
        -> 'fooba'
LENGTH(str)
Returns the length of the string str, measured in bytes. A multi-byte character counts as multiple bytes. This means that for a string containing five two-byte characters, LENGTH() returns 10, whereas CHAR_LENGTH() returns 5.
mysql> SELECT LENGTH('text');
        -> 4
LOAD_FILE(file_name)
Reads the file and returns the file contents as a string. The file must be located on the server, you must specify the full pathname to the file, and you must have the FILE privilege. The file must be readable by all and be smaller than max_allowed_packet bytes. If the file doesn't exist or cannot be read because one of the preceding conditions is not satisfied, the function returns NULL.
mysql> UPDATE tbl_name
           SET blob_column=LOAD_FILE('/tmp/picture')
           WHERE id=1;
Before MySQL 3.23, you must read the file inside your application and create an INSERT statement to update the database with the file contents. If you are using the MySQL++ library, one way to do this can be found in the MySQL++ manual, available at http://dev.mysql.com/doc/.
LOCATE(substr,str)
LOCATE(substr,str,pos)
The first syntax returns the position of the first occurrence of substring substr in string str. The second syntax returns the position of the first occurrence of substring substr in string str, starting at position pos. Returns 0 if substr is not in str.
mysql> SELECT LOCATE('bar', 'foobarbar');
        -> 4
mysql> SELECT LOCATE('xbar', 'foobar');
        -> 0
mysql> SELECT LOCATE('bar', 'foobarbar',5);
        -> 7
This function is multi-byte safe. In MySQL 3.23, this function is case sensitive. For 4.0 on, it is case sensitive only if either argument is a binary string.
LOWER(str)
Returns the string str with all characters changed to lowercase according to the current character set mapping (the default is ISO-8859-1 Latin1).
mysql> SELECT LOWER('QUADRATICALLY');
        -> 'quadratically'
This function is multi-byte safe.
LPAD(str,len,padstr)
Returns the string str, left-padded with the string padstr to a length of len characters. If str is longer than len, the return value is shortened to len characters.
mysql> SELECT LPAD('hi',4,'??');
        -> '??hi'
mysql> SELECT LPAD('hi',1,'??');
        -> 'h'
LTRIM(str)
Returns the string str with leading space characters removed.
mysql> SELECT LTRIM('  barbar');
        -> 'barbar'
This function is multi-byte safe.
MAKE_SET(bits,str1,str2,...)
Returns a set value (a string containing substrings separated by `,' characters) consisting of the strings that have the corresponding bit in bits set. str1 corresponds to bit 0, str2 to bit 1, and so on. NULL values in str1, str2, ... are not appended to the result.
mysql> SELECT MAKE_SET(1,'a','b','c');
        -> 'a'
mysql> SELECT MAKE_SET(1 | 4,'hello','nice','world');
        -> 'hello,world'
mysql> SELECT MAKE_SET(1 | 4,'hello','nice',NULL,'world');
        -> 'hello'
mysql> SELECT MAKE_SET(0,'a','b','c');
        -> ''
MID(str,pos,len)
MID(str,pos,len) is a synonym for SUBSTRING(str,pos,len).
OCT(N)
Returns a string representation of the octal value of N, where N is a longlong (BIGINT)number. This is equivalent to CONV(N,10,8). Returns NULL if N is NULL.
mysql> SELECT OCT(12);
        -> '14'
OCTET_LENGTH(str)
OCTET_LENGTH() is a synonym for LENGTH().
ORD(str)
If the leftmost character of the string str is a multi-byte character, returns the code for that character, calculated from the numeric values of its constituent bytes using this formula:
  (1st byte code)
+ (2nd byte code * 256)
+ (3rd byte code * 256^2) ...
If the leftmost character is not a multi-byte character, ORD() returns the same value as the ASCII() function.
mysql> SELECT ORD('2');
        -> 50
POSITION(substr IN str)
POSITION(substr IN str) is a synonym for LOCATE(substr,str).
QUOTE(str)
Quotes a string to produce a result that can be used as a properly escaped data value in an SQL statement. The string is returned surrounded by single quotes and with each instance of single quote (`''), backslash (`\'), ASCII NUL, and Control-Z preceded by a backslash. If the argument is NULL, the return value is the word ``NULL'' without surrounding single quotes. The QUOTE() function was added in MySQL 4.0.3.
mysql> SELECT QUOTE('Don\'t!');
        -> 'Don\'t!'
mysql> SELECT QUOTE(NULL);
        -> NULL
REPEAT(str,count)
Returns a string consisting of the string str repeated count times. If count <= 0, returns an empty string. Returns NULL if str or count are NULL.
mysql> SELECT REPEAT('MySQL', 3);
        -> 'MySQLMySQLMySQL'
REPLACE(str,from_str,to_str)
Returns the string str with all occurrences of the string from_str replaced by the string to_str.
mysql> SELECT REPLACE('www.mysql.com', 'w', 'Ww');
        -> 'WwWwWw.mysql.com'
This function is multi-byte safe.
REVERSE(str)
Returns the string str with the order of the characters reversed.
mysql> SELECT REVERSE('abc');
        -> 'cba'
This function is multi-byte safe.
RIGHT(str,len)
Returns the rightmost len characters from the string str.
mysql> SELECT RIGHT('foobarbar', 4);
        -> 'rbar'
This function is multi-byte safe.
RPAD(str,len,padstr)
Returns the string str, right-padded with the string padstr to a length of len characters. If str is longer than len, the return value is shortened to len characters.
mysql> SELECT RPAD('hi',5,'?');
        -> 'hi???'
mysql> SELECT RPAD('hi',1,'?');
        -> 'h'
This function is multi-byte safe.
RTRIM(str)
Returns the string str with trailing space characters removed.
mysql> SELECT RTRIM('barbar   ');
        -> 'barbar'
This function is multi-byte safe.
SOUNDEX(str)
Returns a soundex string from str. Two strings that sound almost the same should have identical soundex strings. A standard soundex string is four characters long, but the SOUNDEX() function returns an arbitrarily long string. You can use SUBSTRING() on the result to get a standard soundex string. All non-alphabetic characters are ignored in the given string. All international alphabetic characters outside the A-Z range are treated as vowels.
mysql> SELECT SOUNDEX('Hello');
        -> 'H400'
mysql> SELECT SOUNDEX('Quadratically');
        -> 'Q36324'
Note: This function implements the original Soundex algorithm, not the more popular enhanced version (also described by D. Knuth). The difference is that original version discards vowels first and then duplicates, whereas the enhanced version discards duplicates first and then vowels.
expr1 SOUNDS LIKE expr2
This is the same as SOUNDEX(expr1) = SOUNDEX(expr2). It is available only in MySQL 4.1 or later.
SPACE(N)
Returns a string consisting of N space characters.
mysql> SELECT SPACE(6);
        -> '      '
SUBSTRING(str,pos)
SUBSTRING(str FROM pos)
SUBSTRING(str,pos,len)
SUBSTRING(str FROM pos FOR len)
The forms without a len argument return a substring from string str starting at position pos. The forms with a len argument return a substring len characters long from string str, starting at position pos. The forms that use FROM are standard SQL syntax.
mysql> SELECT SUBSTRING('Quadratically',5);
        -> 'ratically'
mysql> SELECT SUBSTRING('foobarbar' FROM 4);
        -> 'barbar'
mysql> SELECT SUBSTRING('Quadratically',5,6);
        -> 'ratica'
This function is multi-byte safe.
SUBSTRING_INDEX(str,delim,count)
Returns the substring from string str before count occurrences of the delimiter delim. If count is positive, everything to the left of the final delimiter (counting from the left) is returned. If count is negative, everything to the right of the final delimiter (counting from the right) is returned.
mysql> SELECT SUBSTRING_INDEX('www.mysql.com', '.', 2);
        -> 'www.mysql'
mysql> SELECT SUBSTRING_INDEX('www.mysql.com', '.', -2);
        -> 'mysql.com'
This function is multi-byte safe.
TRIM([{BOTH | LEADING | TRAILING} [remstr] FROM] str)
TRIM(remstr FROM] str)
Returns the string str with all remstr prefixes and/or suffixes removed. If none of the specifiers BOTH, LEADING, or TRAILING is given, BOTH is assumed. If remstr is optional and not specified, spaces are removed.
mysql> SELECT TRIM('  bar   ');
        -> 'bar'
mysql> SELECT TRIM(LEADING 'x' FROM 'xxxbarxxx');
        -> 'barxxx'
mysql> SELECT TRIM(BOTH 'x' FROM 'xxxbarxxx');
        -> 'bar'
mysql> SELECT TRIM(TRAILING 'xyz' FROM 'barxxyz');
        -> 'barx'
This function is multi-byte safe.
UCASE(str)
UCASE() is a synonym for UPPER().
UNCOMPRESS(string_to_uncompress)
Uncompresses a string compressed by the COMPRESS() function. If the argument is not a compressed value, the result is NULL. This function requires MySQL to have been compiled with a compression library such as zlib. Otherwise, the return value is always NULL.
mysql> SELECT UNCOMPRESS(COMPRESS('any string'));
        -> 'any string'
mysql> SELECT UNCOMPRESS('any string');
        -> NULL
UNCOMPRESS() was added in MySQL 4.1.1.
UNCOMPRESSED_LENGTH(compressed_string)
Returns the length of a compressed string before compression.
mysql> SELECT UNCOMPRESSED_LENGTH(COMPRESS(REPEAT('a',30)));
        -> 30
UNCOMPRESSED_LENGTH() was added in MySQL 4.1.1.
UNHEX(str)
Does the opposite of HEX(str). That is, it interprets each pair of hexadecimal digits in the argument as a number and converts it to the character represented by the number. The resulting characters are returned as a binary string.
mysql> SELECT UNHEX('4D7953514C');
        -> 'MySQL'
mysql> SELECT 0x4D7953514C;
        -> 'MySQL'
mysql> SELECT UNHEX(HEX('string'));
        -> 'string'
mysql> SELECT HEX(UNHEX('1267'));
        -> '1267'
UNHEX() was added in MySQL 4.1.2.
UPPER(str)
Returns the string str with all characters changed to uppercase according to the current character set mapping (the default is ISO-8859-1 Latin1).
mysql> SELECT UPPER('Hej');
        -> 'HEJ'
This function is multi-byte safe.

12.3.1 String Comparison Functions

MySQL automatically converts numbers to strings as necessary, and vice versa.

mysql> SELECT 1+'1';
        -> 2
mysql> SELECT CONCAT(2,' test');
        -> '2 test'

If you want to convert a number to a string explicitly, use the CAST() or CONCAT() function:

mysql> SELECT 38.8, CAST(38.8 AS CHAR);
        -> 38.8, '38.8'
mysql> SELECT 38.8, CONCAT(38.8);
        -> 38.8, '38.8'

CAST() is preferable, but it is unavailable before MySQL 4.0.2.

If a string function is given a binary string as an argument, the resulting string is also a binary string. A number converted to a string is treated as a binary string. This affects only comparisons.

Normally, if any expression in a string comparison is case sensitive, the comparison is performed in case-sensitive fashion.

expr LIKE pat [ESCAPE 'escape-char']
Pattern matching using SQL simple regular expression comparison. Returns 1 (TRUE) or 0 (FALSE). If either expr or pat is NULL, the result is NULL. With LIKE you can use the following two wildcard characters in the pattern:
Character Description
% Matches any number of characters, even zero characters
_ Matches exactly one character
mysql> SELECT 'David!' LIKE 'David_';
        -> 1
mysql> SELECT 'David!' LIKE '%D%v%';
        -> 1
To test for literal instances of a wildcard character, precede the character with the escape character. If you don't specify the ESCAPE character, `\' is assumed.
String Description
\% Matches one `%' character
\_ Matches one `_' character
mysql> SELECT 'David!' LIKE 'David\_';
        -> 0
mysql> SELECT 'David_' LIKE 'David\_';
        -> 1
To specify a different escape character, use the ESCAPE clause:
mysql> SELECT 'David_' LIKE 'David|_' ESCAPE '|';
        -> 1
The following two statements illustrate that string comparisons are not case sensitive unless one of the operands is a binary string:
mysql> SELECT 'abc' LIKE 'ABC';
        -> 1
mysql> SELECT 'abc' LIKE BINARY 'ABC';
        -> 0
In MySQL, LIKE is allowed on numeric expressions. (This is an extension to the standard SQL LIKE.)
mysql> SELECT 10 LIKE '1%';
        -> 1
Note: Because MySQL uses the C escape syntax in strings (for example, `\n' to represent newline), you must double any `\' that you use in your LIKE strings. For example, to search for `\n', specify it as `\\n'. To search for `\', specify it as `\\\\' (the backslashes are stripped once by the parser and another time when the pattern match is done, leaving a single backslash to be matched).
expr NOT LIKE pat [ESCAPE 'escape-char']
This is the same as NOT (expr LIKE pat [ESCAPE 'escape-char']).
expr NOT REGEXP pat
expr NOT RLIKE pat
This is the same as NOT (expr REGEXP pat).
expr REGEXP pat
expr RLIKE pat
Performs a pattern match of a string expression expr against a pattern pat. The pattern can be an extended regular expression. The syntax for regular expressions is discussed in section G MySQL Regular Expressions. Returns 1 if expr matches pat, otherwise returns 0. If either expr or pat is NULL, the result is NULL. RLIKE is a synonym for REGEXP, provided for mSQL compatibility. Note: Because MySQL uses the C escape syntax in strings (for example, `\n' to represent newline), you must double any `\' that you use in your REGEXP strings. As of MySQL 3.23.4, REGEXP is not case sensitive for normal (not binary) strings.
mysql> SELECT 'Monty!' REGEXP 'm%y%%';
        -> 0
mysql> SELECT 'Monty!' REGEXP '.*';
        -> 1
mysql> SELECT 'new*\n*line' REGEXP 'new\\*.\\*line';
        -> 1
mysql> SELECT 'a' REGEXP 'A', 'a' REGEXP BINARY 'A';
        -> 1  0
mysql> SELECT 'a' REGEXP '^[a-d]';
        -> 1
REGEXP and RLIKE use the current character set (ISO-8859-1 Latin1 by default) when deciding the type of a character. However, these operators are not multi-byte safe.
STRCMP(expr1,expr2)
STRCMP() returns 0 if the strings are the same, -1 if the first argument is smaller than the second according to the current sort order, and 1 otherwise.
mysql> SELECT STRCMP('text', 'text2');
        -> -1
mysql> SELECT STRCMP('text2', 'text');
        -> 1
mysql> SELECT STRCMP('text', 'text');
        -> 0
As of MySQL 4.0, STRCMP() uses the current character set when performing comparisons. This makes the default comparison behavior case insensitive unless one or both of the operands are binary strings. Before MySQL 4.0, STRCMP() is case sensitive.

12.4 Numeric Functions

12.4.1 Arithmetic Operators

The usual arithmetic operators are available. Note that in the case of -, +, and *, the result is calculated with BIGINT (64-bit) precision if both arguments are integers. If one of the argument is an unsigned integer, and the other argument is also an integer, the result will be an unsigned integer. See section 12.7 Cast Functions and Operators.

+
Addition:
mysql> SELECT 3+5;
        -> 8
-
Subtraction:
mysql> SELECT 3-5;
        -> -2
-
Unary minus. Changes the sign of the argument.
mysql> SELECT - 2;
        -> -2
Note that if this operator is used with a BIGINT, the return value is a BIGINT! This means that you should avoid using - on integers that may have the value of -2^63!
*
Multiplication:
mysql> SELECT 3*5;
        -> 15
mysql> SELECT 18014398509481984*18014398509481984.0;
        -> 324518553658426726783156020576256.0
mysql> SELECT 18014398509481984*18014398509481984;
        -> 0
The result of the last expression is incorrect because the result of the integer multiplication exceeds the 64-bit range of BIGINT calculations.
/
Division:
mysql> SELECT 3/5;
        -> 0.60
Division by zero produces a NULL result:
mysql> SELECT 102/(1-1);
        -> NULL
A division will be calculated with BIGINT arithmetic only if performed in a context where its result is converted to an integer!
DIV
Integer division. Similar to FLOOR() but safe with BIGINT values.
mysql> SELECT 5 DIV 2;
        -> 2
DIV is new in MySQL 4.1.0.

12.4.2 Mathematical Functions

All mathematical functions return NULL in case of an error.

ABS(X)
Returns the absolute value of X.
mysql> SELECT ABS(2);
        -> 2
mysql> SELECT ABS(-32);
        -> 32
This function is safe to use with BIGINT values.
ACOS(X)
Returns the arc cosine of X, that is, the value whose cosine is X. Returns NULL if X is not in the range -1 to 1.
mysql> SELECT ACOS(1);
        -> 0.000000
mysql> SELECT ACOS(1.0001);
        -> NULL
mysql> SELECT ACOS(0);
        -> 1.570796
ASIN(X)
Returns the arc sine of X, that is, the value whose sine is X. Returns NULL if X is not in the range -1 to 1.
mysql> SELECT ASIN(0.2);
        -> 0.201358
mysql> SELECT ASIN('foo');
        -> 0.000000
ATAN(X)
Returns the arc tangent of X, that is, the value whose tangent is X.
mysql> SELECT ATAN(2);
        -> 1.107149
mysql> SELECT ATAN(-2);
        -> -1.107149
ATAN(Y,X)
ATAN2(Y,X)
Returns the arc tangent of the two variables X and Y. It is similar to calculating the arc tangent of Y / X, except that the signs of both arguments are used to determine the quadrant of the result.
mysql> SELECT ATAN(-2,2);
        -> -0.785398
mysql> SELECT ATAN2(PI(),0);
        -> 1.570796
CEILING(X)
CEIL(X)
Returns the smallest integer value not less than X.
mysql> SELECT CEILING(1.23);
        -> 2
mysql> SELECT CEIL(-1.23);
        -> -1
Note that the return value is converted to a BIGINT! The CEIL() alias was added in MySQL 4.0.6.
COS(X)
Returns the cosine of X, where X is given in radians.
mysql> SELECT COS(PI());
        -> -1.000000
COT(X)
Returns the cotangent of X.
mysql> SELECT COT(12);
        -> -1.57267341
mysql> SELECT COT(0);
        -> NULL
CRC32(expr)
Computes a cyclic redundancy check value and returns a 32-bit unsigned value. The result is NULL if the argument is NULL. The argument is expected be a string and will be treated as one if it is not.
mysql> SELECT CRC32('MySQL');
        -> 3259397556
CRC32() is available as of MySQL 4.1.0.
DEGREES(X)
Returns the argument X, converted from radians to degrees.
mysql> SELECT DEGREES(PI());
        -> 180.000000
EXP(X)
Returns the value of e (the base of natural logarithms) raised to the power of X.
mysql> SELECT EXP(2);
        -> 7.389056
mysql> SELECT EXP(-2);
        -> 0.135335
FLOOR(X)
Returns the largest integer value not greater than X.
mysql> SELECT FLOOR(1.23);
        -> 1
mysql> SELECT FLOOR(-1.23);
        -> -2
Note that the return value is converted to a BIGINT!
LN(X)
Returns the natural logarithm of X.
mysql> SELECT LN(2);
        -> 0.693147
mysql> SELECT LN(-2);
        -> NULL
This function was added in MySQL 4.0.3. It is synonymous with LOG(X) in MySQL.
LOG(X)
LOG(B,X)
If called with one parameter, this function returns the natural logarithm of X.
mysql> SELECT LOG(2);
        -> 0.693147
mysql> SELECT LOG(-2);
        -> NULL
If called with two parameters, this function returns the logarithm of X for an arbitrary base B.
mysql> SELECT LOG(2,65536);
        -> 16.000000
mysql> SELECT LOG(1,100);
        -> NULL
The arbitrary base option was added in MySQL 4.0.3. LOG(B,X) is equivalent to LOG(X)/LOG(B).
LOG2(X)
Returns the base-2 logarithm of X.
mysql> SELECT LOG2(65536);
        -> 16.000000
mysql> SELECT LOG2(-100);
        -> NULL
LOG2() is useful for finding out how many bits a number would require for storage. This function was added in MySQL 4.0.3. In earlier versions, you can use LOG(X)/LOG(2) instead.
LOG10(X)
Returns the base-10 logarithm of X.
mysql> SELECT LOG10(2);
        -> 0.301030
mysql> SELECT LOG10(100);
        -> 2.000000
mysql> SELECT LOG10(-100);
        -> NULL
MOD(N,M)
N % M
N MOD M
Modulo operation. Returns the remainder of N divided by M.
mysql> SELECT MOD(234, 10);
        -> 4
mysql> SELECT 253 % 7;
        -> 1
mysql> SELECT MOD(29,9);
        -> 2
mysql> SELECT 29 MOD 9;
        -> 2
This function is safe to use with BIGINT values. The N MOD M syntax works only as of MySQL 4.1. As of MySQL 4.1.7, MOD() works on values with a fractional part and returns the exact remainder after division:
mysql> SELECT MOD(34.5,3);
        -> 1.5
Before MySQL 4.1.7, MOD() rounds arguments with a fractional value to integers and returns an integer result:
mysql> SELECT MOD(34.5,3);
        -> 2
PI()
Returns the value of PI. The default number of decimals displayed is five, but MySQL internally uses the full double-precision value for PI.
mysql> SELECT PI();
        -> 3.141593
mysql> SELECT PI()+0.000000000000000000;
        -> 3.141592653589793116
POW(X,Y)
POWER(X,Y)
Returns the value of X raised to the power of Y.
mysql> SELECT POW(2,2);
        -> 4.000000
mysql> SELECT POW(2,-2);
        -> 0.250000
RADIANS(X)
Returns the argument X, converted from degrees to radians.
mysql> SELECT RADIANS(90);
        -> 1.570796
RAND()
RAND(N)
Returns a random floating-point value in the range from 0 to 1.0. If an integer argument N is specified, it is used as the seed value (producing a repeatable sequence).
mysql> SELECT RAND();
        -> 0.9233482386203
mysql> SELECT RAND(20);
        -> 0.15888261251047
mysql> SELECT RAND(20);
        -> 0.15888261251047
mysql> SELECT RAND();
        -> 0.63553050033332
mysql> SELECT RAND();
        -> 0.70100469486881
You can't use a column with RAND() values in an ORDER BY clause, because ORDER BY would evaluate the column multiple times. As of MySQL 3.23, you can retrieve rows in random order like this:
mysql> SELECT * FROM tbl_name ORDER BY RAND();
ORDER BY RAND() combined with LIMIT is useful for selecting a random sample of a set of rows:
mysql> SELECT * FROM table1, table2 WHERE a=b AND c<d
    -> ORDER BY RAND() LIMIT 1000;
Note that RAND() in a WHERE clause is re-evaluated every time the WHERE is executed. RAND() is not meant to be a perfect random generator, but instead a fast way to generate ad hoc random numbers that will be portable between platforms for the same MySQL version.
ROUND(X)
ROUND(X,D)
Returns the argument X, rounded to the nearest integer. With two arguments, returns X rounded to D decimals. If D is negative, the integer part of the number is zeroed out.
mysql> SELECT ROUND(-1.23);
        -> -1
mysql> SELECT ROUND(-1.58);
        -> -2
mysql> SELECT ROUND(1.58);
        -> 2
mysql> SELECT ROUND(1.298, 1);
        -> 1.3
mysql> SELECT ROUND(1.298, 0);
        -> 1
mysql> SELECT ROUND(23.298, -1);
        -> 20
Note that the behavior of ROUND() when the argument is halfway between two integers depends on the C library implementation. Different implementations round to the nearest even number, always up, always down, or always toward zero. If you need one kind of rounding, you should use a well-defined function such as TRUNCATE() or FLOOR() instead.
SIGN(X)
Returns the sign of the argument as -1, 0, or 1, depending on whether X is negative, zero, or positive.
mysql> SELECT SIGN(-32);
        -> -1
mysql> SELECT SIGN(0);
        -> 0
mysql> SELECT SIGN(234);
        -> 1
SIN(X)
Returns the sine of X, where X is given in radians.
mysql> SELECT SIN(PI());
        -> 0.000000
SQRT(X)
Returns the non-negative square root of X.
mysql> SELECT SQRT(4);
        -> 2.000000
mysql> SELECT SQRT(20);
        -> 4.472136
TAN(X)
Returns the tangent of X, where X is given in radians.
mysql> SELECT TAN(PI()+1);
        -> 1.557408
TRUNCATE(X,D)
Returns the number X, truncated to D decimals. If D is 0, the result will have no decimal point or fractional part. If D is negative, the integer part of the number is zeroed out.
mysql> SELECT TRUNCATE(1.223,1);
        -> 1.2
mysql> SELECT TRUNCATE(1.999,1);
        -> 1.9
mysql> SELECT TRUNCATE(1.999,0);
        -> 1
mysql> SELECT TRUNCATE(-1.999,1);
        -> -1.9
mysql> SELECT TRUNCATE(122,-2);
       -> 100
Starting from MySQL 3.23.51, all numbers are rounded toward zero. Note that decimal numbers are normally not stored as exact numbers in computers, but as double-precision values, so you may be surprised by the following result:
mysql> SELECT TRUNCATE(10.28*100,0);
       -> 1027
This happens because 10.28 is actually stored as something like 10.2799999999999999.

12.5 Date and Time Functions

This section describes the functions that can be used to manipulate temporal values. See section 11.3 Date and Time Types for a description of the range of values each date and time type has and the valid formats in which values may be specified.

Here is an example that uses date functions. The following query selects all records with a date_col value from within the last 30 days:

mysql> SELECT something FROM tbl_name
    -> WHERE DATE_SUB(CURDATE(),INTERVAL 30 DAY) <= date_col;

Note that the query also will select records with dates that lie in the future.

Functions that expect date values usually will accept datetime values and ignore the time part. Functions that expect time values usually will accept datetime values and ignore the date part.

Functions that return the current date or time each are evaluated only once per query at the start of query execution. This means that multiple references to a function such as NOW() within a single query will always produce the same result. This principle also applies to CURDATE(), CURTIME(), UTC_DATE(), UTC_TIME(), UTC_TIMESTAMP(), and to any of their synonyms.

Beginning with MySQL 4.1.3, the CURRENT_TIMESTAMP(), CURRENT_TIME(), CURRENT_DATE(), and FROM_UNIXTIME() functions return values in the connection's current time zone, which is available as the value of the time_zone system variable. Also, UNIX_TIMESTAMP() assumes that its argument is a datetime value in the current time zone. See section 5.8.8 MySQL Server Time Zone Support.

The return value ranges in the following function descriptions apply for complete dates. If a date is a ``zero'' value or an incomplete date such as '2001-11-00', functions that extract a part of a date may return 0. For example, DAYOFMONTH('2001-11-00') returns 0.

ADDDATE(date,INTERVAL expr type)
ADDDATE(expr,days)
When invoked with the INTERVAL form of the second argument, ADDDATE() is a synonym for DATE_ADD(). The related function SUBDATE() is a synonym for DATE_SUB(). For information on the INTERVAL argument, see the discussion for DATE_ADD().
mysql> SELECT DATE_ADD('1998-01-02', INTERVAL 31 DAY);
        -> '1998-02-02'
mysql> SELECT ADDDATE('1998-01-02', INTERVAL 31 DAY);
        -> '1998-02-02'
As of MySQL 4.1.1, the second syntax is allowed, where expr is a date or datetime expression and days is the number of days to be added to expr.
mysql> SELECT ADDDATE('1998-01-02', 31);
        -> '1998-02-02'
ADDTIME(expr,expr2)
ADDTIME() adds expr2 to expr and returns the result. expr is a time or datetime expression, and expr2 is a time expression.
mysql> SELECT ADDTIME('1997-12-31 23:59:59.999999',
    ->                '1 1:1:1.000002');
        -> '1998-01-02 01:01:01.000001'
mysql> SELECT ADDTIME('01:00:00.999999', '02:00:00.999998');
        -> '03:00:01.999997'
ADDTIME() was added in MySQL 4.1.1.
CONVERT_TZ(dt,from_tz,to_tz)
CONVERT_TZ() converts a datetime value dt from time zone given by from_tz to the time zone given by to_tz and returns the resulting value. Time zones may be specified as described in section 5.8.8 MySQL Server Time Zone Support. This function returns NULL if the arguments are invalid. If the value falls out of the supported range of the TIMESTAMP type when converted fom from_tz to UTC, no conversion occurs. The TIMESTAMP range is described at section 11.1.2 Overview of Date and Time Types.
mysql> SELECT CONVERT_TZ('2004-01-01 12:00:00','GMT','MET');
        -> '2004-01-01 13:00:00'
mysql> SELECT CONVERT_TZ('2004-01-01 12:00:00','+00:00','-07:00');
        -> '2004-01-01 05:00:00'
To use named time zones such as 'MET' or 'Europe/Moscow', the time zone tables must be properly set up. See section 5.8.8 MySQL Server Time Zone Support for instructions. CONVERT_TZ() was added in MySQL 4.1.3.
CURDATE()
Returns the current date as a value in 'YYYY-MM-DD' or YYYYMMDD format, depending on whether the function is used in a string or numeric context.
mysql> SELECT CURDATE();
        -> '1997-12-15'
mysql> SELECT CURDATE() + 0;
        -> 19971215
CURRENT_DATE
CURRENT_DATE()
CURRENT_DATE and CURRENT_DATE() are synonyms for CURDATE().
CURTIME()
Returns the current time as a value in 'HH:MM:SS' or HHMMSS format, depending on whether the function is used in a string or numeric context.
mysql> SELECT CURTIME();
        -> '23:50:26'
mysql> SELECT CURTIME() + 0;
        -> 235026
CURRENT_TIME
CURRENT_TIME()
CURRENT_TIME and CURRENT_TIME() are synonyms for CURTIME().
CURRENT_TIMESTAMP
CURRENT_TIMESTAMP()
CURRENT_TIMESTAMP and CURRENT_TIMESTAMP() are synonyms for NOW().
DATE(expr)
Extracts the date part of the date or datetime expression expr.
mysql> SELECT DATE('2003-12-31 01:02:03');
        -> '2003-12-31'
DATE() is available as of MySQL 4.1.1.
DATEDIFF(expr,expr2)
DATEDIFF() returns the number of days between the start date expr and the end date expr2. expr and expr2 are date or date-and-time expressions. Only the date parts of the values are used in the calculation.
mysql> SELECT DATEDIFF('1997-12-31 23:59:59','1997-12-30');
        -> 1
mysql> SELECT DATEDIFF('1997-11-30 23:59:59','1997-12-31');
        -> -31
DATEDIFF() was added in MySQL 4.1.1.
DATE_ADD(date,INTERVAL expr type)
DATE_SUB(date,INTERVAL expr type)
These functions perform date arithmetic. date is a DATETIME or DATE value specifying the starting date. expr is an expression specifying the interval value to be added or subtracted from the starting date. expr is a string; it may start with a `-' for negative intervals. type is a keyword indicating how the expression should be interpreted. The INTERVAL keyword and the type specifier are not case sensitive. The following table shows how the type and expr arguments are related:
type Value Expected expr Format
MICROSECOND MICROSECONDS
SECOND SECONDS
MINUTE MINUTES
HOUR HOURS
DAY DAYS
WEEK WEEKS
MONTH MONTHS
QUARTER QUARTERS
YEAR YEARS
SECOND_MICROSECOND 'SECONDS.MICROSECONDS'
MINUTE_MICROSECOND 'MINUTES.MICROSECONDS'
MINUTE_SECOND 'MINUTES:SECONDS'
HOUR_MICROSECOND 'HOURS.MICROSECONDS'
HOUR_SECOND 'HOURS:MINUTES:SECONDS'
HOUR_MINUTE 'HOURS:MINUTES'
DAY_MICROSECOND 'DAYS.MICROSECONDS'
DAY_SECOND 'DAYS HOURS:MINUTES:SECONDS'
DAY_MINUTE 'DAYS HOURS:MINUTES'
DAY_HOUR 'DAYS HOURS'
YEAR_MONTH 'YEARS-MONTHS'
The type values DAY_MICROSECOND, HOUR_MICROSECOND, MINUTE_MICROSECOND, SECOND_MICROSECOND, and MICROSECOND are allowed as of MySQL 4.1.1. The values QUARTER and WEEK are allowed as of MySQL 5.0.0. MySQL allows any punctuation delimiter in the expr format. Those shown in the table are the suggested delimiters. If the date argument is a DATE value and your calculations involve only YEAR, MONTH, and DAY parts (that is, no time parts), the result is a DATE value. Otherwise, the result is a DATETIME value. As of MySQL 3.23, INTERVAL expr type is allowed on either side of the + operator if the expression on the other side is a date or datetime value. For the - operator, INTERVAL expr type is allowed only on the right side, because it makes no sense to subtract a date or datetime value from an interval. (See examples below.)
mysql> SELECT '1997-12-31 23:59:59' + INTERVAL 1 SECOND;
        -> '1998-01-01 00:00:00'
mysql> SELECT INTERVAL 1 DAY + '1997-12-31';
        -> '1998-01-01'
mysql> SELECT '1998-01-01' - INTERVAL 1 SECOND;
        -> '1997-12-31 23:59:59'
mysql> SELECT DATE_ADD('1997-12-31 23:59:59',
    ->                 INTERVAL 1 SECOND);
        -> '1998-01-01 00:00:00'
mysql> SELECT DATE_ADD('1997-12-31 23:59:59',
    ->                 INTERVAL 1 DAY);
        -> '1998-01-01 23:59:59'
mysql> SELECT DATE_ADD('1997-12-31 23:59:59',
    ->                 INTERVAL '1:1' MINUTE_SECOND);
        -> '1998-01-01 00:01:00'
mysql> SELECT DATE_SUB('1998-01-01 00:00:00',
    ->                 INTERVAL '1 1:1:1' DAY_SECOND);
        -> '1997-12-30 22:58:59'
mysql> SELECT DATE_ADD('1998-01-01 00:00:00',
    ->                 INTERVAL '-1 10' DAY_HOUR);
        -> '1997-12-30 14:00:00'
mysql> SELECT DATE_SUB('1998-01-02', INTERVAL 31 DAY);
        -> '1997-12-02'
mysql> SELECT DATE_ADD('1992-12-31 23:59:59.000002',
    ->            INTERVAL '1.999999' SECOND_MICROSECOND);
        -> '1993-01-01 00:00:01.000001'
If you specify an interval value that is too short (does not include all the interval parts that would be expected from the type keyword), MySQL assumes that you have left out the leftmost parts of the interval value. For example, if you specify a type of DAY_SECOND, the value of expr is expected to have days, hours, minutes, and seconds parts. If you specify a value like '1:10', MySQL assumes that the days and hours parts are missing and the value represents minutes and seconds. In other words, '1:10' DAY_SECOND is interpreted in such a way that it is equivalent to '1:10' MINUTE_SECOND. This is analogous to the way that MySQL interprets TIME values as representing elapsed time rather than as time of day. If you add to or subtract from a date value something that contains a time part, the result is automatically converted to a datetime value:
mysql> SELECT DATE_ADD('1999-01-01', INTERVAL 1 DAY);
        -> '1999-01-02'
mysql> SELECT DATE_ADD('1999-01-01', INTERVAL 1 HOUR);
        -> '1999-01-01 01:00:00'
If you use really malformed dates, the result is NULL. If you add MONTH, YEAR_MONTH, or YEAR and the resulting date has a day that is larger than the maximum day for the new month, the day is adjusted to the maximum days in the new month:
mysql> SELECT DATE_ADD('1998-01-30', INTERVAL 1 MONTH);
        -> '1998-02-28'
DATE_FORMAT(date,format)
Formats the date value according to the format string. The following specifiers may be used in the format string:
Specifier Description
%a Abbreviated weekday name (Sun..Sat)
%b Abbreviated month name (Jan..Dec)
%c Month, numeric (0..12)
%D Day of the month with English suffix (0th, 1st, 2nd, 3rd, ...)
%d Day of the month, numeric (00..31)
%e Day of the month, numeric (0..31)
%f Microseconds (000000..999999)
%H Hour (00..23)
%h Hour (01..12)
%I Hour (01..12)
%i Minutes, numeric (00..59)
%j Day of year (001..366)
%k Hour (0..23)
%l Hour (1..12)
%M Month name (January..December)
%m Month, numeric (00..12)
%p AM or PM
%r Time, 12-hour (hh:mm:ss followed by AM or PM)
%S Seconds (00..59)
%s Seconds (00..59)
%T Time, 24-hour (hh:mm:ss)
%U Week (00..53), where Sunday is the first day of the week
%u Week (00..53), where Monday is the first day of the week
%V Week (01..53), where Sunday is the first day of the week; used with %X
%v Week (01..53), where Monday is the first day of the week; used with %x
%W Weekday name (Sunday..Saturday)
%w Day of the week (0=Sunday..6=Saturday)
%X Year for the week where Sunday is the first day of the week, numeric, four digits; used with %V
%x Year for the week, where Monday is the first day of the week, numeric, four digits; used with %v
%Y Year, numeric, four digits
%y Year, numeric, two digits
%% A literal `%'.
All other characters are copied to the result without interpretation. The %v, %V, %x, and %X format specifiers are available as of MySQL 3.23.8. %f is available as of MySQL 4.1.1. As of MySQL 3.23, the `%' character is required before format specifier characters. In earlier versions of MySQL, `%' was optional. The reason the ranges for the month and day specifiers begin with zero is that MySQL allows incomplete dates such as '2004-00-00' to be stored as of MySQL 3.23.
mysql> SELECT DATE_FORMAT('1997-10-04 22:23:00', '%W %M %Y');
        -> 'Saturday October 1997'
mysql> SELECT DATE_FORMAT('1997-10-04 22:23:00', '%H:%i:%s');
        -> '22:23:00'
mysql> SELECT DATE_FORMAT('1997-10-04 22:23:00',
                          '%D %y %a %d %m %b %j');
        -> '4th 97 Sat 04 10 Oct 277'
mysql> SELECT DATE_FORMAT('1997-10-04 22:23:00',
                          '%H %k %I %r %T %S %w');
        -> '22 22 10 10:23:00 PM 22:23:00 00 6'
mysql> SELECT DATE_FORMAT('1999-01-01', '%X %V');
        -> '1998 52'
DAY(date)
DAY() is a synonym for DAYOFMONTH(). It is available as of MySQL 4.1.1.
DAYNAME(date)
Returns the name of the weekday for date.
mysql> SELECT DAYNAME('1998-02-05');
        -> 'Thursday'
DAYOFMONTH(date)
Returns the day of the month for date, in the range 1 to 31.
mysql> SELECT DAYOFMONTH('1998-02-03');
        -> 3
DAYOFWEEK(date)
Returns the weekday index for date (1 = Sunday, 2 = Monday, ..., 7 = Saturday). These index values correspond to the ODBC standard.
mysql> SELECT DAYOFWEEK('1998-02-03');
        -> 3
DAYOFYEAR(date)
Returns the day of the year for date, in the range 1 to 366.
mysql> SELECT DAYOFYEAR('1998-02-03');
        -> 34
EXTRACT(type FROM date)
The EXTRACT() function uses the same kinds of interval type specifiers as DATE_ADD() or DATE_SUB(), but extracts parts from the date rather than performing date arithmetic.
mysql> SELECT EXTRACT(YEAR FROM '1999-07-02');
       -> 1999
mysql> SELECT EXTRACT(YEAR_MONTH FROM '1999-07-02 01:02:03');
       -> 199907
mysql> SELECT EXTRACT(DAY_MINUTE FROM '1999-07-02 01:02:03');
       -> 20102
mysql> SELECT EXTRACT(MICROSECOND
    ->                FROM '2003-01-02 10:30:00.00123');
        -> 123
EXTRACT() was added in MySQL 3.23.0.
FROM_DAYS(N)
Given a daynumber N, returns a DATE value.
mysql> SELECT FROM_DAYS(729669);
        -> '1997-10-07'
FROM_DAYS() is not intended for use with values that precede the advent of the Gregorian calendar (1582), because it does not take into account the days that were lost when the calendar was changed.
FROM_UNIXTIME(unix_timestamp)
FROM_UNIXTIME(unix_timestamp,format)
Returns a representation of the unix_timestamp argument as a value in 'YYYY-MM-DD HH:MM:SS' or YYYYMMDDHHMMSS format, depending on whether the function is used in a string or numeric context.
mysql> SELECT FROM_UNIXTIME(875996580);
        -> '1997-10-04 22:23:00'
mysql> SELECT FROM_UNIXTIME(875996580) + 0;
        -> 19971004222300
If format is given, the result is formatted according to the format string. format may contain the same specifiers as those listed in the entry for the DATE_FORMAT() function.
mysql> SELECT FROM_UNIXTIME(UNIX_TIMESTAMP(),
    ->                      '%Y %D %M %h:%i:%s %x');
        -> '2003 6th August 06:22:58 2003'
GET_FORMAT(DATE|TIME|DATETIME, 'EUR'|'USA'|'JIS'|'ISO'|'INTERNAL')
Returns a format string. This function is useful in combination with the DATE_FORMAT() and the STR_TO_DATE() functions. The three possible values for the first argument and the five possible values for the second argument result in 15 possible format strings (for the specifiers used, see the table in the DATE_FORMAT() function description).
Function Call Result
GET_FORMAT(DATE,'USA') '%m.%d.%Y'
GET_FORMAT(DATE,'JIS') '%Y-%m-%d'
GET_FORMAT(DATE,'ISO') '%Y-%m-%d'
GET_FORMAT(DATE,'EUR') '%d.%m.%Y'
GET_FORMAT(DATE,'INTERNAL') '%Y%m%d'
GET_FORMAT(DATETIME,'USA') '%Y-%m-%d-%H.%i.%s'
GET_FORMAT(DATETIME,'JIS') '%Y-%m-%d %H:%i:%s'
GET_FORMAT(DATETIME,'ISO') '%Y-%m-%d %H:%i:%s'
GET_FORMAT(DATETIME,'EUR') '%Y-%m-%d-%H.%i.%s'
GET_FORMAT(DATETIME,'INTERNAL') '%Y%m%d%H%i%s'
GET_FORMAT(TIME,'USA') '%h:%i:%s %p'
GET_FORMAT(TIME,'JIS') '%H:%i:%s'
GET_FORMAT(TIME,'ISO') '%H:%i:%s'
GET_FORMAT(TIME,'EUR') '%H.%i.%S'
GET_FORMAT(TIME,'INTERNAL') '%H%i%s'
ISO format is ISO 9075, not ISO 8601. As of MySQL 4.1.4, TIMESTAMP can also be used; GET_FORMAT() returns the same values as for DATETIME.
mysql> SELECT DATE_FORMAT('2003-10-03',GET_FORMAT(DATE,'EUR'));
        -> '03.10.2003'
mysql> SELECT STR_TO_DATE('10.31.2003',GET_FORMAT(DATE,'USA'));
        -> 2003-10-31
GET_FORMAT() is available as of MySQL 4.1.1. See section 13.5.3 SET Syntax.
HOUR(time)
Returns the hour for time. The range of the return value will be 0 to 23 for time-of-day values.
mysql> SELECT HOUR('10:05:03');
        -> 10
However, the range of TIME values actually is much larger, so HOUR can return values greater than 23.

mysql> SELECT HOUR('272:59:59');
        -> 272
LAST_DAY(date)
Takes a date or datetime value and returns the corresponding value for the last day of the month. Returns NULL if the argument is invalid.
mysql> SELECT LAST_DAY('2003-02-05');
        -> '2003-02-28'
mysql> SELECT LAST_DAY('2004-02-05');
        -> '2004-02-29'
mysql> SELECT LAST_DAY('2004-01-01 01:01:01');
        -> '2004-01-31'
mysql> SELECT LAST_DAY('2003-03-32');
        -> NULL
LAST_DAY() is available as of MySQL 4.1.1.
LOCALTIME
LOCALTIME()
LOCALTIME and LOCALTIME() are synonyms for NOW(). They were added in MySQL 4.0.6.
LOCALTIMESTAMP
LOCALTIMESTAMP()
LOCALTIMESTAMP and LOCALTIMESTAMP() are synonyms for NOW(). They were added in MySQL 4.0.6.
MAKEDATE(year,dayofyear)
Returns a date, given year and day-of-year values. dayofyear must be greater than 0 or the result will be NULL.
mysql> SELECT MAKEDATE(2001,31), MAKEDATE(2001,32);
        -> '2001-01-31', '2001-02-01'
mysql> SELECT MAKEDATE(2001,365), MAKEDATE(2004,365);
        -> '2001-12-31', '2004-12-30'
mysql> SELECT MAKEDATE(2001,0);
        -> NULL
MAKEDATE() is available as of MySQL 4.1.1.
MAKETIME(hour,minute,second)
Returns a time value calculated from the hour, minute, and second arguments.
mysql> SELECT MAKETIME(12,15,30);
        -> '12:15:30'
MAKETIME() is available as of MySQL 4.1.1.
MICROSECOND(expr)
Returns the microseconds from the time or datetime expression expr as a number in the range from 0 to 999999.
mysql> SELECT MICROSECOND('12:00:00.123456');
        -> 123456
mysql> SELECT MICROSECOND('1997-12-31 23:59:59.000010');
        -> 10
MICROSECOND() is available as of MySQL 4.1.1.
MINUTE(time)
Returns the minute for time, in the range 0 to 59.
mysql> SELECT MINUTE('98-02-03 10:05:03');
        -> 5
MONTH(date)
Returns the month for date, in the range 1 to 12.
mysql> SELECT MONTH('1998-02-03');
        -> 2
MONTHNAME(date)
Returns the full name of the month for date.
mysql> SELECT MONTHNAME('1998-02-05');
        -> 'February'
NOW()
Returns the current date and time as a value in 'YYYY-MM-DD HH:MM:SS' or YYYYMMDDHHMMSS format, depending on whether the function is used in a string or numeric context.
mysql> SELECT NOW();
        -> '1997-12-15 23:50:26'
mysql> SELECT NOW() + 0;
        -> 19971215235026
PERIOD_ADD(P,N)
Adds N months to period P (in the format YYMM or YYYYMM). Returns a value in the format YYYYMM. Note that the period argument P is not a date value.
mysql> SELECT PERIOD_ADD(9801,2);
        -> 199803
PERIOD_DIFF(P1,P2)
Returns the number of months between periods P1 and P2. P1 and P2 should be in the format YYMM or YYYYMM. Note that the period arguments P1 and P2 are not date values.
mysql> SELECT PERIOD_DIFF(9802,199703);
        -> 11
QUARTER(date)
Returns the quarter of the year for date, in the range 1 to 4.
mysql> SELECT QUARTER('98-04-01');
        -> 2
SECOND(time)
Returns the second for time, in the range 0 to 59.
mysql> SELECT SECOND('10:05:03');
        -> 3
SEC_TO_TIME(seconds)
Returns the seconds argument, converted to hours, minutes, and seconds, as a value in 'HH:MM:SS' or HHMMSS format, depending on whether the function is used in a string or numeric context.
mysql> SELECT SEC_TO_TIME(2378);
        -> '00:39:38'
mysql> SELECT SEC_TO_TIME(2378) + 0;
        -> 3938
STR_TO_DATE(str,format)
This is the reverse function of the DATE_FORMAT() function. It takes a string str and a format string format. STR_TO_DATE() returns a DATETIME value if the format string contains both date and time parts, or a DATE or TIME value if the string contains only date or time parts. The date, time, or datetime values contained in str should be given in the format indicated by format. For the specifiers that can be used in format, see the table in the DATE_FORMAT() function description. All other characters are just taken verbatim, thus not being interpreted. If str contains an illegal date, time, or datetime value, STR_TO_DATE() returns NULL.
mysql> SELECT STR_TO_DATE('03.10.2003 09.20',
    ->                    '%d.%m.%Y %H.%i');
        -> '2003-10-03 09:20:00'
mysql> SELECT STR_TO_DATE('10arp', '%carp');
        -> '0000-10-00 00:00:00'
mysql> SELECT STR_TO_DATE('2003-15-10 00:00:00',
    ->                    '%Y-%m-%d %H:%i:%s');
        -> NULL
Range checking on the parts of date values is as described in section 11.3.1 The DATETIME, DATE, and TIMESTAMP Types. This means, for example, that a date with a day part larger than the number of days in a month is allowable as long as the day part is in the range from 1 to 31. Also, ``zero'' dates or dates with part values of 0 are allowed.
mysql> SELECT STR_TO_DATE('00/00/0000', '%m/%d/%Y');
        -> '0000-00-00'
mysql> SELECT STR_TO_DATE('04/31/2004', '%m/%d/%Y');
        -> '2004-04-31'
STR_TO_DATE() is available as of MySQL 4.1.1.
SUBDATE(date,INTERVAL expr type)
SUBDATE(expr,days)
When invoked with the INTERVAL form of the second argument, SUBDATE() is a synonym for DATE_SUB(). For information on the INTERVAL argument, see the discussion for DATE_ADD().
mysql> SELECT DATE_SUB('1998-01-02', INTERVAL 31 DAY);
        -> '1997-12-02'
mysql> SELECT SUBDATE('1998-01-02', INTERVAL 31 DAY);
        -> '1997-12-02'
As of MySQL 4.1.1, the second syntax is allowed, where expr is a date or datetime expression and days is the number of days to be subtracted from expr.
mysql> SELECT SUBDATE('1998-01-02 12:00:00', 31);
        -> '1997-12-02 12:00:00'
SUBTIME(expr,expr2)
SUBTIME() subtracts expr2 from expr and returns the result. expr is a time or datetime expression, and expr2 is a time expression.
mysql> SELECT SUBTIME('1997-12-31 23:59:59.999999',
    ->                '1 1:1:1.000002');
        -> '1997-12-30 22:58:58.999997'
mysql> SELECT SUBTIME('01:00:00.999999', '02:00:00.999998');
        -> '-00:59:59.999999'
SUBTIME() was added in MySQL 4.1.1.
SYSDATE()
SYSDATE() is a synonym for NOW().
TIME(expr)
Extracts the time part of the time or datetime expression expr.
mysql> SELECT TIME('2003-12-31 01:02:03');
        -> '01:02:03'
mysql> SELECT TIME('2003-12-31 01:02:03.000123');
        -> '01:02:03.000123'
TIME() is available as of MySQL 4.1.1.
TIMEDIFF(expr,expr2)
TIMEDIFF() returns the time between the start time expr and the end time expr2. expr and expr2 are time or date-and-time expressions, but both must be of the same type.
mysql> SELECT TIMEDIFF('2000:01:01 00:00:00',
    ->                 '2000:01:01 00:00:00.000001');
        -> '-00:00:00.000001'
mysql> SELECT TIMEDIFF('1997-12-31 23:59:59.000001',
    ->                 '1997-12-30 01:01:01.000002');
        -> '46:58:57.999999'
TIMEDIFF() was added in MySQL 4.1.1.
TIMESTAMP(expr)
TIMESTAMP(expr,expr2)
With one argument, returns the date or datetime expression expr as a datetime value. With two arguments, adds the time expression expr2 to the date or datetime expression expr and returns a datetime value.
mysql> SELECT TIMESTAMP('2003-12-31');
        -> '2003-12-31 00:00:00'
mysql> SELECT TIMESTAMP('2003-12-31 12:00:00','12:00:00');
        -> '2004-01-01 00:00:00'
TIMESTAMP() is available as of MySQL 4.1.1.
TIMESTAMPADD(interval,int_expr,datetime_expr)
Adds the integer expression int_expr to the date or datetime expression datetime_expr. The unit for int_expr is given by the interval argument, which should be one of the following values: FRAC_SECOND, SECOND, MINUTE, HOUR, DAY, WEEK, MONTH, QUARTER, or YEAR. The interval value may be specified using one of keywords as shown, or with a prefix of SQL_TSI_. For example, DAY or SQL_TSI_DAY both are legal.
mysql> SELECT TIMESTAMPADD(MINUTE,1,'2003-01-02');
        -> '2003-01-02 00:01:00'
mysql> SELECT TIMESTAMPADD(WEEK,1,'2003-01-02');
        -> '2003-01-09'
TIMESTAMPADD() is available as of MySQL 5.0.0.
TIMESTAMPDIFF(interval,datetime_expr1,datetime_expr2)
Returns the integer difference between the date or datetime expressions datetime_expr1 and datetime_expr2. The unit for the result is given by the interval argument. The legal values for interval are the same as those listed in the description of the TIMESTAMPADD() function.
mysql> SELECT TIMESTAMPDIFF(MONTH,'2003-02-01','2003-05-01');
        -> 3
mysql> SELECT TIMESTAMPDIFF(YEAR,'2002-05-01','2001-01-01');
        -> -1
TIMESTAMPDIFF() is available as of MySQL 5.0.0.
TIME_FORMAT(time,format)
This is used like the DATE_FORMAT() function, but the format string may contain only those format specifiers that handle hours, minutes, and seconds. Other specifiers produce a NULL value or 0. If the time value contains an hour part that is greater than 23, the %H and %k hour format specifiers produce a value larger than the usual range of 0..23. The other hour format specifiers produce the hour value modulo 12.
mysql> SELECT TIME_FORMAT('100:00:00', '%H %k %h %I %l');
        -> '100 100 04 04 4'
TIME_TO_SEC(time)
Returns the time argument, converted to seconds.
mysql> SELECT TIME_TO_SEC('22:23:00');
        -> 80580
mysql> SELECT TIME_TO_SEC('00:39:38');
        -> 2378
TO_DAYS(date)
Given a date date, returns a daynumber (the number of days since year 0).
mysql> SELECT TO_DAYS(950501);
        -> 728779
mysql> SELECT TO_DAYS('1997-10-07');
        -> 729669
TO_DAYS() is not intended for use with values that precede the advent of the Gregorian calendar (1582), because it does not take into account the days that were lost when the calendar was changed. Remember that MySQL converts two-digit year values in dates to four-digit form using the rules in section 11.3 Date and Time Types. For example, '1997-10-07' and '97-10-07' are seen as identical dates:
mysql> SELECT TO_DAYS('1997-10-07'), TO_DAYS('97-10-07');
        -> 729669, 729669
For other dates before 1582, results from this function are undefined.
UNIX_TIMESTAMP()
UNIX_TIMESTAMP(date)
If called with no argument, returns a Unix timestamp (seconds since '1970-01-01 00:00:00' GMT) as an unsigned integer. If UNIX_TIMESTAMP() is called with a date argument, it returns the value of the argument as seconds since '1970-01-01 00:00:00' GMT. date may be a DATE string, a DATETIME string, a TIMESTAMP, or a number in the format YYMMDD or YYYYMMDD in local time.
mysql> SELECT UNIX_TIMESTAMP();
        -> 882226357
mysql> SELECT UNIX_TIMESTAMP('1997-10-04 22:23:00');
        -> 875996580
When UNIX_TIMESTAMP is used on a TIMESTAMP column, the function returns the internal timestamp value directly, with no implicit ``string-to-Unix-timestamp'' conversion. If you pass an out-of-range date to UNIX_TIMESTAMP(), it returns 0, but please note that only basic range checking is performed (year from 1970 to 2037, month from 01 to 12, day from 01 from 31). If you want to subtract UNIX_TIMESTAMP() columns, you might want to cast the result to signed integers. See section 12.7 Cast Functions and Operators.
UTC_DATE
UTC_DATE()
Returns the current UTC date as a value in 'YYYY-MM-DD' or YYYYMMDD format, depending on whether the function is used in a string or numeric context.
mysql> SELECT UTC_DATE(), UTC_DATE() + 0;
        -> '2003-08-14', 20030814
UTC_DATE() is available as of MySQL 4.1.1.
UTC_TIME
UTC_TIME()
Returns the current UTC time as a value in 'HH:MM:SS' or HHMMSS format, depending on whether the function is used in a string or numeric context.
mysql> SELECT UTC_TIME(), UTC_TIME() + 0;
        -> '18:07:53', 180753
UTC_TIME() is available as of MySQL 4.1.1.
UTC_TIMESTAMP
UTC_TIMESTAMP()
Returns the current UTC date and time as a value in 'YYYY-MM-DD HH:MM:SS' or YYYYMMDDHHMMSS format, depending on whether the function is used in a string or numeric context.
mysql> SELECT UTC_TIMESTAMP(), UTC_TIMESTAMP() + 0;
        -> '2003-08-14 18:08:04', 20030814180804
UTC_TIMESTAMP() is available as of MySQL 4.1.1.
WEEK(date[,mode])
The function returns the week number for date. The two-argument form of WEEK() allows you to specify whether the week starts on Sunday or Monday and whether the return value should be in the range from 0 to 53 or from 1 to 52. If the mode argument is omitted, the value of the default_week_format system variable is used (or 0 before MySQL 4.0.14). See section 5.2.3 Server System Variables. The following table describes how the mode argument works:
Value Meaning
0 Week starts on Sunday; return value range is 0 to 53; week 1 is the first week that starts in this year
1 Week starts on Monday; return value range is 0 to 53; week 1 is the first week that has more than three days in this year
2 Week starts on Sunday; return value range is 1 to 53; week 1 is the first week that starts in this year
3 Week starts on Monday; return value range is 1 to 53; week 1 is the first week that has more than three days in this year
4 Week starts on Sunday; return value range is 0 to 53; week 1 is the first week that has more than three days in this year
5 Week starts on Monday; return value range is 0 to 53; week 1 is the first week that starts in this year
6 Week starts on Sunday; return value range is 1 to 53; week 1 is the first week that has more than three days in this year
7 Week starts on Monday; return value range is 1 to 53; week 1 is the first week that starts in this year
The mode value of 3 can be used as of MySQL 4.0.5. Values of 4 and above can be used as of MySQL 4.0.17.
mysql> SELECT WEEK('1998-02-20');
        -> 7
mysql> SELECT WEEK('1998-02-20',0);
        -> 7
mysql> SELECT WEEK('1998-02-20',1);
        -> 8
mysql> SELECT WEEK('1998-12-31',1);
        -> 53
Note: In MySQL 4.0, WEEK(date,0) was changed to match the calendar in the USA. Before that, WEEK() was calculated incorrectly for dates in the USA. (In effect, WEEK(date) and WEEK(date,0) were incorrect for all cases.) Note that if a date falls in the last week of the previous year, MySQL returns 0 if you don't use 2, 3, 6, or 7 as the optional mode argument:
mysql> SELECT YEAR('2000-01-01'), WEEK('2000-01-01',0);
        -> 2000, 0
One might argue that MySQL should return 52 for the WEEK() function, because the given date actually occurs in the 52nd week of 1999. We decided to return 0 instead because we want the function to return ``the week number in the given year.'' This makes use of the WEEK() function reliable when combined with other functions that extract a date part from a date. If you would prefer the result to be evaluated with respect to the year that contains the first day of the week for the given date, you should use 2, 3, 6, or 7 as the optional mode argument.
mysql> SELECT WEEK('2000-01-01',2);
        -> 52
Alternatively, use the YEARWEEK() function:
mysql> SELECT YEARWEEK('2000-01-01');
        -> 199952
mysql> SELECT MID(YEARWEEK('2000-01-01'),5,2);
        -> '52'
WEEKDAY(date)
Returns the weekday index for date (0 = Monday, 1 = Tuesday, ... 6 = Sunday).
mysql> SELECT WEEKDAY('1998-02-03 22:23:00');
        -> 1
mysql> SELECT WEEKDAY('1997-11-05');
        -> 2
WEEKOFYEAR(date)
Returns the calendar week of the date as a number in the range from 1 to 53.
mysql> SELECT WEEKOFYEAR('1998-02-20');
        -> 8
WEEKOFYEAR() is available as of MySQL 4.1.1.
YEAR(date)
Returns the year for date, in the range 1000 to 9999.
mysql> SELECT YEAR('98-02-03');
        -> 1998
YEARWEEK(date)
YEARWEEK(date,start)
Returns year and week for a date. The start argument works exactly like the start argument to WEEK(). The year in the result may be different from the year in the date argument for the first and the last week of the year.
mysql> SELECT YEARWEEK('1987-01-01');
        -> 198653
Note that the week number is different from what the WEEK() function would return (0) for optional arguments 0 or 1, as WEEK() then returns the week in the context of the given year. YEARWEEK() was added in MySQL 3.23.8.

12.6 Full-Text Search Functions

MATCH (col1,col2,...) AGAINST (expr [IN BOOLEAN MODE | WITH QUERY EXPANSION])
As of MySQL 3.23.23, MySQL has support for full-text indexing and searching. A full-text index in MySQL is an index of type FULLTEXT. FULLTEXT indexes are used with MyISAM tables only and can be created from CHAR, VARCHAR, or TEXT columns at CREATE TABLE time or added later with ALTER TABLE or CREATE INDEX. For large datasets, it will be much faster to load your data into a table that has no FULLTEXT index, then create the index with ALTER TABLE (or CREATE INDEX). Loading data into a table that already has a FULLTEXT index could be significantly slower. Constraints on full-text searching are listed in section 12.6.3 Full-Text Restrictions.

Full-text searching is performed with the MATCH() function.

mysql> CREATE TABLE articles (
    ->   id INT UNSIGNED AUTO_INCREMENT NOT NULL PRIMARY KEY,
    ->   title VARCHAR(200),
    ->   body TEXT,
    ->   FULLTEXT (title,body)
    -> );
Query OK, 0 rows affected (0.00 sec)

mysql> INSERT INTO articles (title,body) VALUES
    -> ('MySQL Tutorial','DBMS stands for DataBase ...'),
    -> ('How To Use MySQL Well','After you went through a ...'),
    -> ('Optimizing MySQL','In this tutorial we will show ...'),
    -> ('1001 MySQL Tricks','1. Never run mysqld as root. 2. ...'),
    -> ('MySQL vs. YourSQL','In the following database comparison ...'),
    -> ('MySQL Security','When configured properly, MySQL ...');
Query OK, 6 rows affected (0.00 sec)
Records: 6  Duplicates: 0  Warnings: 0

mysql> SELECT * FROM articles
    -> WHERE MATCH (title,body) AGAINST ('database');
+----+-------------------+------------------------------------------+
| id | title             | body                                     |
+----+-------------------+------------------------------------------+
|  5 | MySQL vs. YourSQL | In the following database comparison ... |
|  1 | MySQL Tutorial    | DBMS stands for DataBase ...             |
+----+-------------------+------------------------------------------+
2 rows in set (0.00 sec)

The MATCH() function performs a natural language search for a string against a text collection. A collection is a set of one or more columns included in a FULLTEXT index. The search string is given as the argument to AGAINST(). For every row in the table, MATCH() returns a relevance value, that is, a similarity measure between the search string and the text in that row in the columns named in the MATCH() list.

By default, the search is performed in case-insensitive fashion. In MySQL 4.1 and up, you can make a full-text search by using a binary collation for the indexed columns. For example, a column that has a character set of latin1 can be assigned a collation of latin1_bin to make it case sensitive for full-text searches.

When MATCH() is used in a WHERE clause, as in the preceding example, the rows returned are automatically sorted with the highest relevance first. Relevance values are non-negative floating-point numbers. Zero relevance means no similarity. Relevance is computed based on the number of words in the row, the number of unique words in that row, the total number of words in the collection, and the number of documents (rows) that contain a particular word.

For natural-language full-text searches, it is a requirement that the columns named in the MATCH() function be the same columns included in some FULLTEXT index in your table. For the preceding query, note that the columns named in the MATCH() function (title and body) are the same as those named in the definition of the article table's FULLTEXT index. If you wanted to search the title or body separately, you would need to create FULLTEXT indexes for each column.

It is also possible to perform a boolean search or a search with query expansion. These search types are described in section 12.6.1 Boolean Full-Text Searches and section 12.6.2 Full-Text Searches with Query Expansion.

The preceding example is a basic illustration showing how to use the MATCH() function where rows are returned in order of decreasing relevance. The next example shows how to retrieve the relevance values explicitly. Returned rows are not ordered because the SELECT statement includes neither WHERE nor ORDER BY clauses:

mysql> SELECT id, MATCH (title,body) AGAINST ('Tutorial')
    -> FROM articles;
+----+-----------------------------------------+
| id | MATCH (title,body) AGAINST ('Tutorial') |
+----+-----------------------------------------+
|  1 |                        0.65545833110809 |
|  2 |                                       0 |
|  3 |                        0.66266459226608 |
|  4 |                                       0 |
|  5 |                                       0 |
|  6 |                                       0 |
+----+-----------------------------------------+
6 rows in set (0.00 sec)

The following example is more complex. The query returns the relevance values and it also sorts the rows in order of decreasing relevance. To achieve this result, you should specify MATCH() twice: once in the SELECT list and once in the WHERE clause. This causes no additional overhead, because the MySQL optimizer notices that the two MATCH() calls are identical and invokes the full-text search code only once.

mysql> SELECT id, body, MATCH (title,body) AGAINST
    -> ('Security implications of running MySQL as root') AS score
    -> FROM articles WHERE MATCH (title,body) AGAINST
    -> ('Security implications of running MySQL as root');
+----+-------------------------------------+-----------------+
| id | body                                | score           |
+----+-------------------------------------+-----------------+
|  4 | 1. Never run mysqld as root. 2. ... | 1.5219271183014 |
|  6 | When configured properly, MySQL ... | 1.3114095926285 |
+----+-------------------------------------+-----------------+
2 rows in set (0.00 sec)

MySQL uses a very simple parser to split text into words. A ``word'' is any sequence of true word characters (letters, digits, and underscores), optionally separated by no more than one sequential `'' character. For example, wasn't is parsed as a single word, but wasn''t is parsed as two words wasn and t. (And then t would be ignored as too short according to the rules following.) Also, single quotes at the ends of words are stripped; only embedded single quotes are retained.

Some words are ignored in full-text searches:

The default minimum word length and stopword list can be changed as described in section 12.6.4 Fine-Tuning MySQL Full-Text Search.

Every correct word in the collection and in the query is weighted according to its significance in the collection or query. This way, a word that is present in many documents has a lower weight (and may even have a zero weight), because it has lower semantic value in this particular collection. Conversely, if the word is rare, it receives a higher weight. The weights of the words are then combined to compute the relevance of the row.

Such a technique works best with large collections (in fact, it was carefully tuned this way). For very small tables, word distribution does not adequately reflect their semantic value, and this model may sometimes produce bizarre results. For example, although the word ``MySQL'' is present in every row of the articles table, a search for the word produces no results:

mysql> SELECT * FROM articles
    -> WHERE MATCH (title,body) AGAINST ('MySQL');
Empty set (0.00 sec)

The search result is empty because the word ``MySQL'' is present in at least 50% of the rows. As such, it is effectively treated as a stopword. For large datasets, this is the most desirable behavior--a natural language query should not return every second row from a 1GB table. For small datasets, it may be less desirable.

A word that matches half of rows in a table is less likely to locate relevant documents. In fact, it will most likely find plenty of irrelevant documents. We all know this happens far too often when we are trying to find something on the Internet with a search engine. It is with this reasoning that rows containing the word are assigned a low semantic value for the particular dataset in which they occur. A given word may exceed the 50% threshold in one dataset but not another.

The 50% threshold has a significant implication when you first try full-text searching to see how it works: If you create a table and insert only one or two rows of text into it, every word in the text occurs in at least 50% of the rows. As a result, no search returns any results. Be sure to insert at least three rows, and preferably many more.

12.6.1 Boolean Full-Text Searches

As of Version 4.0.1, MySQL can also perform boolean full-text searches using the IN BOOLEAN MODE modifier.

mysql> SELECT * FROM articles WHERE MATCH (title,body)
    -> AGAINST ('+MySQL -YourSQL' IN BOOLEAN MODE);
+----+-----------------------+-------------------------------------+
| id | title                 | body                                |
+----+-----------------------+-------------------------------------+
|  1 | MySQL Tutorial        | DBMS stands for DataBase ...        |
|  2 | How To Use MySQL Well | After you went through a ...        |
|  3 | Optimizing MySQL      | In this tutorial we will show ...   |
|  4 | 1001 MySQL Tricks     | 1. Never run mysqld as root. 2. ... |
|  6 | MySQL Security        | When configured properly, MySQL ... |
+----+-----------------------+-------------------------------------+

This query retrieves all the rows that contain the word ``MySQL'' but that do not contain the word ``YourSQL''.

Boolean full-text searches have these characteristics:

The boolean full-text search capability supports the following operators:

+
A leading plus sign indicates that this word must be present in every row returned.
-
A leading minus sign indicates that this word must not be present in any row returned.
(no operator)
By default (when neither + nor - is specified) the word is optional, but the rows that contain it will be rated higher. This mimics the behavior of MATCH() ... AGAINST() without the IN BOOLEAN MODE modifier.
> <
These two operators are used to change a word's contribution to the relevance value that is assigned to a row. The > operator increases the contribution and the < operator decreases it. See the example below.
( )
Parentheses are used to group words into subexpressions. Parenthesized groups can be nested.
~
A leading tilde acts as a negation operator, causing the word's contribution to the row relevance to be negative. It's useful for marking noise words. A row that contains such a word will be rated lower than others, but will not be excluded altogether, as it would be with the - operator.
*
An asterisk is the truncation operator. Unlike the other operators, it should be appended to the word.
"
A phrase that is enclosed within double quote (`"') characters matches only rows that contain the phrase literally, as it was typed.

The following examples demonstrate some search strings that use boolean full-text operators:

'apple banana'
Find rows that contain at least one of the two words.
'+apple +juice'
Find rows that contain both words.
'+apple macintosh'
Find rows that contain the word ``apple'', but rank rows higher if they also contain ``macintosh''.
'+apple -macintosh'
Find rows that contain the word ``apple'' but not ``macintosh''.
'+apple +(>turnover <strudel)'
Find rows that contain the words ``apple'' and ``turnover'', or ``apple'' and ``strudel'' (in any order), but rank ``apple turnover'' higher than ``apple strudel''.
'apple*'
Find rows that contain words such as ``apple'', ``apples'', ``applesauce'', or ``applet''.
'"some words"'
Find rows that contain the exact phrase ``some words'' (for example, rows that contain ``some words of wisdom'' but not ``some noise words''). Note that the `"' characters that surround the phrase are operator characters that delimit the phrase. They are not the quotes that surround the search string itself.

12.6.2 Full-Text Searches with Query Expansion

As of MySQL 4.1.1, full-text search supports query expansion (in particular, its variant ``blind query expansion''). This is generally useful when a search phrase is too short, which often means that the user is relying on implied knowledge that the full-text search engine usually lacks. For example, a user searching for ``database'' may really mean that ``MySQL'', ``Oracle'', ``DB2'', and ``RDBMS'' all are phrases that should match ``databases'' and should be returned, too. This is implied knowledge.

Blind query expansion (also known as automatic relevance feedback) is enabled by adding WITH QUERY EXPANSION following the search phrase. It works by performing the search twice, where the search phrase for the second search is the original search phrase concatenated with the few top found documents from the first search. Thus, if one of these documents contains the word ``databases'' and the word ``MySQL'', the second search will find the documents that contain the word ``MySQL'' even if they do not contain the word ``database''. The following example shows this difference:

mysql> SELECT * FROM articles
    -> WHERE MATCH (title,body) AGAINST ('database');
+----+-------------------+------------------------------------------+
| id | title             | body                                     |
+----+-------------------+------------------------------------------+
|  5 | MySQL vs. YourSQL | In the following database comparison ... |
|  1 | MySQL Tutorial    | DBMS stands for DataBase ...             |
+----+-------------------+------------------------------------------+
2 rows in set (0.00 sec)

mysql> SELECT * FROM articles
    -> WHERE MATCH (title,body)
    -> AGAINST ('database' WITH QUERY EXPANSION);
+----+-------------------+------------------------------------------+
| id | title             | body                                     |
+----+-------------------+------------------------------------------+
|  1 | MySQL Tutorial    | DBMS stands for DataBase ...             |
|  5 | MySQL vs. YourSQL | In the following database comparison ... |
|  3 | Optimizing MySQL  | In this tutorial we will show ...        |
+----+-------------------+------------------------------------------+
3 rows in set (0.00 sec)

Another example could be searching for books by Georges Simenon about Maigret, when a user is not sure how to spell ``Maigret''. A search for ``Megre and the reluctant witnesses'' will find only ``Maigret and the Reluctant Witnesses'' without query expansion. A search with query expansion will find all books with the word ``Maigret'' on the second pass.

Note: Because blind query expansion tends to increase noise significantly by returning non-relevant documents, it's only meaningful to use when a search phrase is rather short.

12.6.3 Full-Text Restrictions

12.6.4 Fine-Tuning MySQL Full-Text Search

The MySQL full-text search capability has few user-tunable parameters yet, although adding more is very high on the TODO. You can exert more control over full-text searching behavior if you have a MySQL source distribution because some changes require source code modfications. See section 2.8 MySQL Installation Using a Source Distribution.

Note that full-text search was carefully tuned for the best searching effectiveness. Modifying the default behavior will, in most cases, make the search results worse. Do not alter the MySQL sources unless you know what you are doing!

Most full-text variables described in the following items must be set at server startup time. For these variables, a server restart is required to change them and you cannot modify them dynamically while the server is running.

Some variable changes require that you rebuild the FULLTEXT indexes in your tables. Instructions for doing this are given at the end of this section.

If you modify full-text variables that affect indexing (ft_min_word_len, ft_max_word_len, or ft_stopword_file), you must rebuild your FULLTEXT indexes after making the changes and restarting the server. To rebuild the indexes in this case, it's sufficient to do a QUICK repair operation:

mysql> REPAIR TABLE tbl_name QUICK;

With regard specifically to using the IN BOOLEAN MODE capability, if you upgrade from MySQL 3.23 to 4.0 or later, it's necessary to replace the index header as well. To do this, do a USE_FRM repair operation:

mysql> REPAIR TABLE tbl_name USE_FRM;

This is necessary because boolean full-text searches require a flag in the index header that was not present in MySQL 3.23, and that is not added if you do only a QUICK repair. If you attempt a boolean full-text search without rebuilding the indexes this way, the search will return incorrect results.

Note that if you use myisamchk to perform an operation that modifies table indexes (such as repair or analyze), the FULLTEXT indexes are rebuilt using the default full-text parameter values for minimum and maximum word length and the stopword file unless you specify otherwise. This can result in queries failing.

The problem occurs because these parameters are known only by the server. They are not stored in MyISAM index files. To avoid the problem if you have modified the minimum or maximum word length or the stopword file in the server, specify the same ft_min_word_len, ft_max_word_len, and ft_stopword_file values to myisamchk that you use for mysqld. For example, if you have set the minimum word length to 3, you can repair a table with myisamchk like this:

shell> myisamchk --recover --ft_min_word_len=3 tbl_name.MYI

To ensure that myisamchk and the server use the same values for full-text parameters, you can place each one in both the [mysqld] and [myisamchk] sections of an option file:

[mysqld]
ft_min_word_len=3

[myisamchk]
ft_min_word_len=3

An alternative to using myisamchk is to use the REPAIR TABLE, ANALYZE TABLE, OPTIMIZE TABLE, or ALTER TABLE. These statements are performed by the server, which knows the proper full-text parameter values to use.

12.6.5 Full-Text Search TODO

12.7 Cast Functions and Operators

BINARY
The BINARY operator casts the string following it to a binary string. This is an easy way to force a column comparison to be done byte by byte rather than character by character. This causes the comparison to be case sensitive even if the column isn't defined as BINARY or BLOB. BINARY also causes trailing spaces to be significant.
mysql> SELECT 'a' = 'A';
        -> 1
mysql> SELECT BINARY 'a' = 'A';
        -> 0
mysql> SELECT 'a' = 'a ';
        -> 1
mysql> SELECT BINARY 'a' = 'a ';
        -> 0
BINARY affects the entire comparison; it can be given before either operand with the same result. BINARY was added in MySQL 3.23.0. As of MySQL 4.0.2, BINARY str is a shorthand for CAST(str AS BINARY). Note that in some contexts, if you cast an indexed column to BINARY, MySQL will not be able to use the index efficiently. If you want to compare a BLOB value or other binary string in case-insensitive fashion, you can do so as follows: CONVERT() can be used more generally for comparing strings that are represented in different character sets.
CAST(expr AS type)
CONVERT(expr,type)
CONVERT(expr USING transcoding_name)
The CAST() and CONVERT() functions can be used to take a value of one type and produce a value of another type. The type can be one of the following values: BINARY produces a binary string. See the entry for the BINARY operator in this section for a description of how this affects comparisons. CAST() and CONVERT() are available as of MySQL 4.0.2. The CHAR conversion type is available as of 4.0.6. The USING form of CONVERT() is available as of 4.1.0. CAST() and CONVERT(... USING ...) are standard SQL syntax. The non-USING form of CONVERT() is ODBC syntax. CONVERT() with USING is used to convert data between different character sets. In MySQL, transcoding names are the same as the corresponding character set names. For example, this statement converts the string 'abc' in the server's default character set to the corresponding string in the utf8 character set:
SELECT CONVERT('abc' USING utf8);

The cast functions are useful when you want to create a column with a specific type in a CREATE ... SELECT statement:

CREATE TABLE new_table SELECT CAST('2000-01-01' AS DATE);

The functions also can be useful for sorting ENUM columns in lexical order. Normally sorting of ENUM columns occurs using the internal numeric values. Casting the values to CHAR results in a lexical sort:

SELECT enum_col FROM tbl_name ORDER BY CAST(enum_col AS CHAR);

CAST(str AS BINARY) is the same thing as BINARY str. CAST(expr AS CHAR) treats the expression as a string with the default character set.

Note: In MysQL 4.0, a CAST() to DATE, DATETIME, or TIME only marks the column to be a specific type but doesn't change the value of the column.

As of MySQL 4.1.0, the value is converted to the correct column type when it's sent to the user (this is a feature of how the new protocol in 4.1 sends date information to the client):

mysql> SELECT CAST(NOW() AS DATE);
       -> 2003-05-26

As of MySQL 4.1.1, CAST() also changes the result if you use it as part of a more complex expression such as CONCAT('Date: ',CAST(NOW() AS DATE)).

You should not use CAST() to extract data in different formats but instead use string functions like LEFT() or EXTRACT(). See section 12.5 Date and Time Functions.

To cast a string to a numeric value in numeric context, you don't normally have to do anything. Just use the string value as though it were a number:

mysql> SELECT 1+'1';
       -> 2

If you use a number in string context, the number automatically is converted to a BINARY string.

mysql> SELECT CONCAT('hello you ',2);
        -> 'hello you 2'

MySQL supports arithmetic with both signed and unsigned 64-bit values. If you are using numeric operators (such as +) and one of the operands is an unsigned integer, the result is unsigned. You can override this by using the SIGNED and UNSIGNED cast operators to cast the operation to a signed or unsigned 64-bit integer, respectively.

mysql> SELECT CAST(1-2 AS UNSIGNED)
        -> 18446744073709551615
mysql> SELECT CAST(CAST(1-2 AS UNSIGNED) AS SIGNED);
        -> -1

Note that if either operand is a floating-point value, the result is a floating-point value and is not affected by the preceding rule. (In this context, DECIMAL column values are regarded as floating-point values.)

mysql> SELECT CAST(1 AS UNSIGNED) - 2.0;
        -> -1.0

If you are using a string in an arithmetic operation, this is converted to a floating-point number.

The handing of unsigned values was changed in MySQL 4.0 to be able to support BIGINT values properly. If you have some code that you want to run in both MySQL 4.0 and 3.23, you probably can't use the CAST() function. You can use the following technique to get a signed result when subtracting two unsigned integer columns ucol1 and ucol2:

mysql> SELECT (ucol1+0.0)-(ucol2+0.0) FROM ...;

The idea is that the columns are converted to floating-point values before the subtraction occurs.

If you have a problem with UNSIGNED columns in old MySQL applications when porting them to MySQL 4.0, you can use the --sql-mode=NO_UNSIGNED_SUBTRACTION option when starting mysqld. However, as long as you use this option, you will not be able to make efficient use of the BIGINT UNSIGNED column type.

12.8 Other Functions

12.8.1 Bit Functions

MySQL uses BIGINT (64-bit) arithmetic for bit operations, so these operators have a maximum range of 64 bits.

|
Bitwise OR:
mysql> SELECT 29 | 15;
        -> 31
The result is an unsigned 64-bit integer.
&
Bitwise AND:
mysql> SELECT 29 & 15;
        -> 13
The result is an unsigned 64-bit integer.
^
Bitwise XOR:
mysql> SELECT 1 ^ 1;
        -> 0
mysql> SELECT 1 ^ 0;
        -> 1
mysql> SELECT 11 ^ 3;
        -> 8
The result is an unsigned 64-bit integer. Bitwise XOR was added in MySQL 4.0.2.
<<
Shifts a longlong (BIGINT) number to the left.
mysql> SELECT 1 << 2;
        -> 4
The result is an unsigned 64-bit integer.
>>
Shifts a longlong (BIGINT) number to the right.
mysql> SELECT 4 >> 2;
        -> 1
The result is an unsigned 64-bit integer.
~
Invert all bits.
mysql> SELECT 5 & ~1;
        -> 4
The result is an unsigned 64-bit integer.
BIT_COUNT(N)
Returns the number of bits that are set in the argument N.
mysql> SELECT BIT_COUNT(29);
        -> 4

12.8.2 Encryption Functions

The functions in this section encrypt and decrypt data values. If you want to store results from an encryption function that might contain arbitrary byte values, use a BLOB column rather than a CHAR or VARCHAR column to avoid potential problems with trailing space removal that would change data values.

AES_ENCRYPT(str,key_str)
AES_DECRYPT(crypt_str,key_str)
These functions allow encryption and decryption of data using the official AES (Advanced Encryption Standard) algorithm, previously known as "Rijndael." Encoding with a 128-bit key length is used, but you can extend it up to 256 bits by modifying the source. We chose 128 bits because it is much faster and it is usually secure enough. The input arguments may be any length. If either argument is NULL, the result of this function is also NULL. Because AES is a block-level algorithm, padding is used to encode uneven length strings and so the result string length may be calculated as 16*(trunc(string_length/16)+1). If AES_DECRYPT() detects invalid data or incorrect padding, it returns NULL. However, it is possible for AES_DECRYPT() to return a non-NULL value (possibly garbage) if the input data or the key is invalid. You can use the AES functions to store data in an encrypted form by modifying your queries:
INSERT INTO t VALUES (1,AES_ENCRYPT('text','password'));
You can get even more security by not transferring the key over the connection for each query, which can be accomplished by storing it in a server-side variable at connection time. For example:
SELECT @password:='my password';
INSERT INTO t VALUES (1,AES_ENCRYPT('text',@password));
AES_ENCRYPT() and AES_DECRYPT() were added in MySQL 4.0.2, and can be considered the most cryptographically secure encryption functions currently available in MySQL.
DECODE(crypt_str,pass_str)
Decrypts the encrypted string crypt_str using pass_str as the password. crypt_str should be a string returned from ENCODE().
ENCODE(str,pass_str)
Encrypt str using pass_str as the password. To decrypt the result, use DECODE(). The result is a binary string of the same length as str. If you want to save it in a column, use a BLOB column type.
DES_DECRYPT(crypt_str[,key_str])
Decrypts a string encrypted with DES_ENCRYPT(). On error, this function returns NULL. Note that this function works only if MySQL has been configured with SSL support. See section 5.6.7 Using Secure Connections. If no key_str argument is given, DES_DECRYPT() examines the first byte of the encrypted string to determine the DES key number that was used to encrypt the original string, and then reads the key from the DES key file to decrypt the message. For this to work, the user must have the SUPER privilege. The key file can be specified with the --des-key-file server option. If you pass this function a key_str argument, that string is used as the key for decrypting the message. If the crypt_str argument doesn't look like an encrypted string, MySQL will return the given crypt_str. DES_DECRYPT() was added in MySQL 4.0.1.
DES_ENCRYPT(str[,(key_num|key_str)])
Encrypts the string with the given key using the Triple-DES algorithm. On error, this function returns NULL. Note that this function works only if MySQL has been configured with SSL support. See section 5.6.7 Using Secure Connections. The encryption key to use is chosen based on the second argument to DES_ENCRYPT(), if one was given:
Argument Description
No argument The first key from the DES key file is used.
key_num The given key number (0-9) from the DES key file is used.
key_str The given key string is used to encrypt str.
The key file can be specified with the --des-key-file server option. The return string is a binary string where the first character is CHAR(128 | key_num). The 128 is added to make it easier to recognize an encrypted key. If you use a string key, key_num will be 127. The string length for the result will be new_len = orig_len + (8-(orig_len % 8))+1. Each line in the DES key file has the following format:
key_num des_key_str
Each key_num must be a number in the range from 0 to 9. Lines in the file may be in any order. des_key_str is the string that will be used to encrypt the message. Between the number and the key there should be at least one space. The first key is the default key that is used if you don't specify any key argument to DES_ENCRYPT() You can tell MySQL to read new key values from the key file with the FLUSH DES_KEY_FILE statement. This requires the RELOAD privilege. One benefit of having a set of default keys is that it gives applications a way to check for the existence of encrypted column values, without giving the end user the right to decrypt those values.
mysql> SELECT customer_address FROM customer_table WHERE
       crypted_credit_card = DES_ENCRYPT('credit_card_number');
DES_ENCRYPT() was added in MySQL 4.0.1.
ENCRYPT(str[,salt])
Encrypt str using the Unix crypt() system call. The salt argument should be a string with two characters. (As of MySQL 3.22.16, salt may be longer than two characters.) If no salt argument is given, a random value is used.
mysql> SELECT ENCRYPT('hello');
        -> 'VxuFAJXVARROc'
ENCRYPT() ignores all but the first eight characters of str, at least on some systems. This behavior is determined by the implementation of the underlying crypt() system call. If crypt() is not available on your system, ENCRYPT() always returns NULL. Because of this, we recommend that you use MD5() or SHA1() instead, because those two functions exist on all platforms.
MD5(str)
Calculates an MD5 128-bit checksum for the string. The value is returned as a binary string of 32 hex digits, or NULL if the argument was NULL. The return value can, for example, be used as a hash key.
mysql> SELECT MD5('testing');
        -> 'ae2b1fca515949e5d54fb22b8ed95575'
This is the "RSA Data Security, Inc. MD5 Message-Digest Algorithm." If you want to convert the value to uppercase, see the description of binary string conversion given in the entry for the BINARY operator in section 12.7 Cast Functions and Operators. MD5() was added in MySQL 3.23.2.
OLD_PASSWORD(str)
OLD_PASSWORD() is available as of MySQL 4.1, when the implementation of PASSWORD() was changed to improve security. OLD_PASSWORD() returns the value of the pre-4.1 implementation of PASSWORD(). section 5.5.9 Password Hashing in MySQL 4.1.
PASSWORD(str)
Calculates and returns a password string from the plaintext password str, or NULL if the argument was NULL. This is the function that is used for encrypting MySQL passwords for storage in the Password column of the user grant table.
mysql> SELECT PASSWORD('badpwd');
        -> '7f84554057dd964b'
PASSWORD() encryption is one-way (not reversible). PASSWORD() does not perform password encryption in the same way that Unix passwords are encrypted. See ENCRYPT(). Note: The PASSWORD() function is used by the authentication system in MySQL Server, you should not use it in your own applications. For that purpose, use MD5() or SHA1() instead. Also see RFC 2195 for more information about handling passwords and authentication securely in your application.
SHA1(str)
SHA(str)
Calculates an SHA1 160-bit checksum for the string, as described in RFC 3174 (Secure Hash Algorithm). The value is returned as a string of 40 hex digits, or NULL if the argument was NULL. One of the possible uses for this function is as a hash key. You can also use it as a cryptographically safe function for storing passwords.
mysql> SELECT SHA1('abc');
        -> 'a9993e364706816aba3e25717850c26c9cd0d89d'
SHA1() was added in MySQL 4.0.2, and can be considered a cryptographically more secure equivalent of MD5(). SHA() is synonym for SHA1().

12.8.3 Information Functions

BENCHMARK(count,expr)
The BENCHMARK() function executes the expression expr repeatedly count times. It may be used to time how fast MySQL processes the expression. The result value is always 0. The intended use is from within the mysql client, which reports query execution times:
mysql> SELECT BENCHMARK(1000000,ENCODE('hello','goodbye'));
+----------------------------------------------+
| BENCHMARK(1000000,ENCODE('hello','goodbye')) |
+----------------------------------------------+
|                                            0 |
+----------------------------------------------+
1 row in set (4.74 sec)
The time reported is elapsed time on the client end, not CPU time on the server end. It is advisable to execute BENCHMARK() several times, and to interpret the result with regard to how heavily loaded the server machine is.
CHARSET(str)
Returns the character set of the string argument.
mysql> SELECT CHARSET('abc');
        -> 'latin1'
mysql> SELECT CHARSET(CONVERT('abc' USING utf8));
        -> 'utf8'
mysql> SELECT CHARSET(USER());
        -> 'utf8'
CHARSET() was added in MySQL 4.1.0.
COERCIBILITY(str)
Returns the collation coercibility value of the string argument.
mysql> SELECT COERCIBILITY('abc' COLLATE latin1_swedish_ci);
        -> 0
mysql> SELECT COERCIBILITY('abc');
        -> 3
mysql> SELECT COERCIBILITY(USER());
        -> 2
The return values have the following meanings:
Coercibility Meaning
0 Explicit collation
1 No collation
2 Implicit collation
3 Coercible
Lower values have higher precedence. COERCIBILITY() was added in MySQL 4.1.1.
COLLATION(str)
Returns the collation for the character set of the string argument.
mysql> SELECT COLLATION('abc');
        -> 'latin1_swedish_ci'
mysql> SELECT COLLATION(_utf8'abc');
        -> 'utf8_general_ci'
COLLATION() was added in MySQL 4.1.0.
CONNECTION_ID()
Returns the connection ID (thread ID) for the connection. Every connection has its own unique ID.
mysql> SELECT CONNECTION_ID();
        -> 23786
CONNECTION_ID() was added in MySQL 3.23.14.
CURRENT_USER()
Returns the username and hostname combination that the current session was authenticated as. This value corresponds to the MySQL account that determines your access privileges. It can be different from the value of USER().
mysql> SELECT USER();
        -> 'davida@localhost'
mysql> SELECT * FROM mysql.user;
ERROR 1044: Access denied for user ''@'localhost' to
database 'mysql'
mysql> SELECT CURRENT_USER();
        -> '@localhost'
The example illustrates that although the client specified a username of davida (as indicated by the value of the USER() function), the server authenticated the client using an anonymous user account (as seen by the empty username part of the CURRENT_USER() value). One way this might occur is that there is no account listed in the grant tables for davida. CURRENT_USER() was added in MySQL 4.0.6.
DATABASE()
Returns the default (current) database name.
mysql> SELECT DATABASE();
        -> 'test'
If there is no default database, DATABASE() returns NULL as of MySQL 4.1.1, and the empty string before that.
FOUND_ROWS()
A SELECT statement may include a LIMIT clause to restrict the number of rows the server returns to the client. In some cases, it is desirable to know how many rows the statement would have returned without the LIMIT, but without running the statement again. To get this row count, include a SQL_CALC_FOUND_ROWS option in the SELECT statement, then invoke FOUND_ROWS() afterward:
mysql> SELECT SQL_CALC_FOUND_ROWS * FROM tbl_name
    -> WHERE id > 100 LIMIT 10;
mysql> SELECT FOUND_ROWS();
The second SELECT will return a number indicating how many rows the first SELECT would have returned had it been written without the LIMIT clause. (If the preceding SELECT statement does not include the SQL_CALC_FOUND_ROWS option, then FOUND_ROWS() may return a different result when LIMIT is used than when it is not.) Note that if you are using SELECT SQL_CALC_FOUND_ROWS, MySQL must calculate how many rows are in the full result set. However, this is faster than running the query again without LIMIT, because the result set need not be sent to the client. SQL_CALC_FOUND_ROWS and FOUND_ROWS() can be useful in situations when you want to restrict the number of rows that a query returns, but also determine the number of rows in the full result set without running the query again. An example is a Web script that presents a paged display containing links to the pages that show other sections of a search result. Using FOUND_ROWS() allows you to determine how many other pages are needed for the rest of the result. The use of SQL_CALC_FOUND_ROWS and FOUND_ROWS() is more complex for UNION queries than for simple SELECT statements, because LIMIT may occur at multiple places in a UNION. It may be applied to individual SELECT statements in the UNION, or global to the UNION result as a whole. The intent of SQL_CALC_FOUND_ROWS for UNION is that it should return the row count that would be returned without a global LIMIT. The conditions for use of SQL_CALC_FOUND_ROWS with UNION are: SQL_CALC_FOUND_ROWS and FOUND_ROWS() are available starting at MySQL 4.0.0.
LAST_INSERT_ID()
LAST_INSERT_ID(expr)
Returns the last automatically generated value that was inserted into an AUTO_INCREMENT column.
mysql> SELECT LAST_INSERT_ID();
        -> 195
The last ID that was generated is maintained in the server on a per-connection basis. This means the value the function returns to a given client is the most recent AUTO_INCREMENT value generated by that client. The value cannot be affected by other clients, even if they generate AUTO_INCREMENT values of their own. This behavior ensures that you can retrieve your own ID without concern for the activity of other clients, and without the need for locks or transactions. The value of LAST_INSERT_ID() is not changed if you update the AUTO_INCREMENT column of a row with a non-magic value (that is, a value that is not NULL and not 0). If you insert many rows at the same time with an insert statement, LAST_INSERT_ID() returns the value for the first inserted row. The reason for this is to make it possible to easily reproduce the same INSERT statement against some other server. If you use INSERT IGNORE and the record is ignored, the AUTO_INCREMENT counter still is incremented and LAST_INSERT_ID() returns the new value. If expr is given as an argument to LAST_INSERT_ID(), the value of the argument is returned by the function and is remembered as the next value to be returned by LAST_INSERT_ID(). This can be used to simulate sequences: You can generate sequences without calling LAST_INSERT_ID(), but the utility of using the function this way is that the ID value is maintained in the server as the last automatically generated value. It is multi-user safe because multiple clients can issue the UPDATE statement and get their own sequence value with the SELECT statement (or mysql_insert_id()), without affecting or being affected by other clients that generate their own sequence values. Note that mysql_insert_id() is only updated after INSERT and UPDATE statements, so you cannot use the C API function to retrieve the value for LAST_INSERT_ID(expr) after executing other SQL statements like SELECT or SET.
ROW_COUNT()
ROW_COUNT() returns the number of rows updated, inserted, or deleted by the preceding statement. This is the same as the row count that the mysql client displays and the value from the mysql_affected_rows() C API function.
mysql> INSERT INTO t VALUES(1),(2),(3);
Query OK, 3 rows affected (0.00 sec)
Records: 3  Duplicates: 0  Warnings: 0

mysql> SELECT ROW_COUNT();
+-------------+
| ROW_COUNT() |
+-------------+
|           3 |
+-------------+
1 row in set (0.00 sec)

mysql> DELETE FROM t WHERE i IN(1,2);
Query OK, 2 rows affected (0.00 sec)

mysql> SELECT ROW_COUNT();
+-------------+
| ROW_COUNT() |
+-------------+
|           2 |
+-------------+
1 row in set (0.00 sec)
ROW_COUNT() was added in MySQL 5.0.1.
SESSION_USER()
SESSION_USER() is a synonym for USER().
SYSTEM_USER()
SYSTEM_USER() is a synonym for USER().
USER()
Returns the current MySQL username and hostname.
mysql> SELECT USER();
        -> 'davida@localhost'
The value indicates the username you specified when connecting to the server, and the client host from which you connected. The value can be different than that of CURRENT_USER(). Prior to MySQL 3.22.11, the function value does not include the client hostname. You can extract just the username part, regardless of whether the value includes a hostname part, like this:
mysql> SELECT SUBSTRING_INDEX(USER(),'@',1);
        -> 'davida'
As of MySQL 4.1, USER() returns a value in the utf8 character set, so you should also make sure that the '@' string literal is interpreted in that character set:
mysql> SELECT SUBSTRING_INDEX(USER(),_utf8'@',1);
        -> 'davida'
VERSION()
Returns a string that indicates the MySQL server version.
mysql> SELECT VERSION();
        -> '4.1.3-beta-log'
Note that if your version string ends with -log this means that logging is enabled.

12.8.4 Miscellaneous Functions

DEFAULT(col_name)
Returns the default value for a table column. Starting from MySQL 5.0.2, you will get an error if the column doesn't have a default value.
mysql> UPDATE t SET i = DEFAULT(i)+1 WHERE id < 100;
DEFAULT() was added in MySQL 4.1.0.
FORMAT(X,D)
Formats the number X to a format like '#,###,###.##', rounded to D decimals, and returns the result as a string. If D is 0, the result will have no decimal point or fractional part.
mysql> SELECT FORMAT(12332.123456, 4);
        -> '12,332.1235'
mysql> SELECT FORMAT(12332.1,4);
        -> '12,332.1000'
mysql> SELECT FORMAT(12332.2,0);
        -> '12,332'
GET_LOCK(str,timeout)
Tries to obtain a lock with a name given by the string str, with a timeout of timeout seconds. Returns 1 if the lock was obtained successfully, 0 if the attempt timed out (for example, because another client has already locked the name), or NULL if an error occurred (such as running out of memory or the thread was killed with mysqladmin kill). If you have a lock obtained with GET_LOCK(), it is released when you execute RELEASE_LOCK(), execute a new GET_LOCK(), or your connection terminates (either normally or abnormally). This function can be used to implement application locks or to simulate record locks. Names are locked on a server-wide basis. If a name has been locked by one client, GET_LOCK() blocks any request by another client for a lock with the same name. This allows clients that agree on a given lock name to use the name to perform cooperative advisory locking.
mysql> SELECT GET_LOCK('lock1',10);
        -> 1
mysql> SELECT IS_FREE_LOCK('lock2');
        -> 1
mysql> SELECT GET_LOCK('lock2',10);
        -> 1
mysql> SELECT RELEASE_LOCK('lock2');
        -> 1
mysql> SELECT RELEASE_LOCK('lock1');
        -> NULL
Note that the second RELEASE_LOCK() call returns NULL because the lock 'lock1' was automatically released by the second GET_LOCK() call.
INET_ATON(expr)
Given the dotted-quad representation of a network address as a string, returns an integer that represents the numeric value of the address. Addresses may be 4- or 8-byte addresses.
mysql> SELECT INET_ATON('209.207.224.40');
        -> 3520061480
The generated number is always in network byte order. For the example just shown, the number is calculated as 209*256^3 + 207*256^2 + 224*256 + 40. As of MySQL 4.1.2, INET_ATON() also understands short-form IP addresses:
mysql> SELECT INET_ATON('127.0.0.1'), INET_ATON('127.1');
        -> 2130706433, 2130706433
INET_ATON() was added in MySQL 3.23.15.
INET_NTOA(expr)
Given a numeric network address (4 or 8 byte), returns the dotted-quad representation of the address as a string.
mysql> SELECT INET_NTOA(3520061480);
        -> '209.207.224.40'
INET_NTOA() was added in MySQL 3.23.15.
IS_FREE_LOCK(str)
Checks whether the lock named str is free to use (that is, not locked). Returns 1 if the lock is free (no one is using the lock), 0 if the lock is in use, and NULL on errors (such as incorrect arguments). IS_FREE_LOCK() was added in MySQL 4.0.2.
IS_USED_LOCK(str)
Checks whether the lock named str is in use (that is, locked). If so, it returns the connection identifier of the client that holds the lock. Otherwise, it returns NULL. IS_USED_LOCK() was added in MySQL 4.1.0.
MASTER_POS_WAIT(log_name,log_pos[,timeout])
This function is useful for control of master/slave synchronization. It blocks until the slave has read and applied all updates up to the specified position in the master log. The return value is the number of log events it had to wait for to get to the specified position. The function returns NULL if the slave SQL thread is not started, the slave's master information is not initialized, the arguments are incorrect, or an error occurs. It returns -1 if the timeout has been exceeded. If the slave SQL thread stops while MASTER_POS_WAIT() is waiting, the function returns NULL. If the slave is already past the specified position, the function returns immediately. If a timeout value is specified, MASTER_POS_WAIT() stops waiting when timeout seconds have elapsed. timeout must be greater than 0; a zero or negative timeout means no timeout. MASTER_POS_WAIT() was added in MySQL 3.23.32. The timeout argument was added in 4.0.10.
RELEASE_LOCK(str)
Releases the lock named by the string str that was obtained with GET_LOCK(). Returns 1 if the lock was released, 0 if the lock wasn't locked by this thread (in which case the lock is not released), and NULL if the named lock didn't exist. The lock will not exist if it was never obtained by a call to GET_LOCK() or if it already has been released. The DO statement is convenient to use with RELEASE_LOCK(). See section 13.1.2 DO Syntax.
UUID()
Returns a Universal Unique Identifier (UUID) generated according to ``DCE 1.1: Remote Procedure Call'' (Appendix A) CAE (Common Applications Environment) Specifications published by The Open Group in October 1997 (Document Number C706). A UUID is designed as a number that is globally unique in space and time. Two calls to UUID() are expected to generate two different values, even if these calls are performed on two separate computers that are not connected to each other. A UUID is a 128-bit number represented by a string of five hexadecimal numbers in aaaaaaaa-bbbb-cccc-dddd-eeeeeeeeeeee format:
mysql> SELECT UUID();
        -> '6ccd780c-baba-1026-9564-0040f4311e29'
Note that UUID() does not yet work with replication. UUID() was added in MySQL 4.1.2.

12.9 Functions and Modifiers for Use with GROUP BY Clauses

12.9.1 GROUP BY (Aggregate) Functions

If you use a group function in a statement containing no GROUP BY clause, it is equivalent to grouping on all rows.

AVG(expr)
Returns the average value of expr.
mysql> SELECT student_name, AVG(test_score)
    ->        FROM student
    ->        GROUP BY student_name;
BIT_AND(expr)
Returns the bitwise AND of all bits in expr. The calculation is performed with 64-bit (BIGINT) precision. As of MySQL 4.0.17, this function returns 18446744073709551615 if there were no matching rows. (This is an unsigned BIGINT value with all bits set to 1.) Before 4.0.17, the function returns -1 if there were no matching rows.
BIT_OR(expr)
Returns the bitwise OR of all bits in expr. The calculation is performed with 64-bit (BIGINT) precision. This function returns 0 if there were no matching rows.
BIT_XOR(expr)
Returns the bitwise XOR of all bits in expr. The calculation is performed with 64-bit (BIGINT) precision. This function returns 0 if there were no matching rows. This function is available as of MySQL 4.1.1.
COUNT(expr)
Returns a count of the number of non-NULL values in the rows retrieved by a SELECT statement.
mysql> SELECT student.student_name,COUNT(*)
    ->        FROM student,course
    ->        WHERE student.student_id=course.student_id
    ->        GROUP BY student_name;

COUNT(*) is somewhat different in that it returns a count of the number of rows retrieved, whether or not they contain NULL values. COUNT(*) is optimized to return very quickly if the SELECT retrieves from one table, no other columns are retrieved, and there is no WHERE clause. For example:
mysql> SELECT COUNT(*) FROM student;
This optimization applies only to MyISAM and ISAM tables only, because an exact record count is stored for these table types and can be accessed very quickly. For transactional storage engines (InnoDB, BDB), storing an exact row count is more problematic because multiple transactions may be occurring, each of which may affect the count.
COUNT(DISTINCT expr,[expr...])
Returns a count of the number of different non-NULL values.
mysql> SELECT COUNT(DISTINCT results) FROM student;
In MySQL, you can get the number of distinct expression combinations that don't contain NULL by giving a list of expressions. In standard SQL, you would have to do a concatenation of all expressions inside COUNT(DISTINCT ...). COUNT(DISTINCT ...) was added in MySQL 3.23.2.
GROUP_CONCAT(expr)
This function returns a string result with the concatenated non-NULL values from a group. It returns NULL if there are no non-NULL values. The full syntax is as follows:
GROUP_CONCAT([DISTINCT] expr [,expr ...]
             [ORDER BY {unsigned_integer | col_name | expr}
                 [ASC | DESC] [,col_name ...]]
             [SEPARATOR str_val])
mysql> SELECT student_name,
    ->     GROUP_CONCAT(test_score)
    ->     FROM student 
    ->     GROUP BY student_name;
Or:
mysql> SELECT student_name,
    ->     GROUP_CONCAT(DISTINCT test_score
    ->               ORDER BY test_score DESC SEPARATOR ' ')
    ->     FROM student
    ->     GROUP BY student_name;
In MySQL, you can get the concatenated values of expression combinations. You can eliminate duplicate values by using DISTINCT. If you want to sort values in the result, you should use ORDER BY clause. To sort in reverse order, add the DESC (descending) keyword to the name of the column you are sorting by in the ORDER BY clause. The default is ascending order; this may be specified explicitly using the ASC keyword. SEPARATOR is followed by the string value that should be inserted between values of result. The default is a comma (`,'). You can remove the separator altogether by specifying SEPARATOR ''. You can set a maximum allowed length with the group_concat_max_len system variable. The syntax to do this at runtime is as follows, where val is an unsigned integer:
SET [SESSION | GLOBAL] group_concat_max_len = val;
If a maximum length has been set, the result is truncated to this maximum length. GROUP_CONCAT() was added in MySQL 4.1. Note: Before MySQL 4.1.6, there are some small limitations with GROUP_CONCAT() for BLOB and TEXT values when it comes to using DISTINCT together with ORDER BY. To work around this limitation, use MID(expr,1,255) instead.
MIN(expr)
MAX(expr)
Returns the minimum or maximum value of expr. MIN() and MAX() may take a string argument; in such cases they return the minimum or maximum string value. See section 7.4.5 How MySQL Uses Indexes.
mysql> SELECT student_name, MIN(test_score), MAX(test_score)
    ->        FROM student
    ->        GROUP BY student_name;
For MIN(), MAX(), and other aggregate functions, MySQL currently compares ENUM and SET columns by their string value rather than by the string's relative position in the set. This differs from how ORDER BY compares them. This will be rectified.
STD(expr)
STDDEV(expr)
Returns the standard deviation of expr (the square root of VARIANCE()). This is an extension to standard SQL. The STDDEV() form of this function is provided for Oracle compatibility.
SUM(expr)
Returns the sum of expr. If the return set has no rows, SUM() returns NULL.
VARIANCE(expr)
Returns the standard variance of expr (considering rows as the whole population, not as a sample; so it has the number of rows as denominator). This is an extension to standard SQL, available only in MySQL 4.1 or later.

12.9.2 GROUP BY Modifiers

As of MySQL 4.1.1, the GROUP BY clause allows a WITH ROLLUP modifier that causes extra rows to be added to the summary output. These rows represent higher-level (or super-aggregate) summary operations. ROLLUP thus allows you to answer questions at multiple levels of analysis with a single query. It can be used, for example, to provide support for OLAP (Online Analytical Processing) operations.

As an illustration, suppose that a table named sales has year, country, product, and profit columns for recording sales profitability:

CREATE TABLE sales
(
    year    INT NOT NULL,
    country VARCHAR(20) NOT NULL,
    product VARCHAR(32) NOT NULL,
    profit  INT
);

The table's contents can be summarized per year with a simple GROUP BY like this:

mysql> SELECT year, SUM(profit) FROM sales GROUP BY year;
+------+-------------+
| year | SUM(profit) |
+------+-------------+
| 2000 |        4525 |
| 2001 |        3010 |
+------+-------------+

This output shows the total profit for each year, but if you also want to determine the total profit summed over all years, you must add up the individual values yourself or run an additional query.

Or you can use ROLLUP, which provides both levels of analysis with a single query. Adding a WITH ROLLUP modifier to the GROUP BY clause causes the query to produce another row that shows the grand total over all year values:

mysql> SELECT year, SUM(profit) FROM sales GROUP BY year WITH ROLLUP;
+------+-------------+
| year | SUM(profit) |
+------+-------------+
| 2000 |        4525 |
| 2001 |        3010 |
| NULL |        7535 |
+------+-------------+

The grand total super-aggregate line is identified by the value NULL in the year column.

ROLLUP has a more complex effect when there are multiple GROUP BY columns. In this case, each time there is a ``break'' (change in value) in any but the last grouping column, the query produces an extra super-aggregate summary row.

For example, without ROLLUP, a summary on the sales table based on year, country, and product might look like this:

mysql> SELECT year, country, product, SUM(profit)
    -> FROM sales
    -> GROUP BY year, country, product;
+------+---------+------------+-------------+
| year | country | product    | SUM(profit) |
+------+---------+------------+-------------+
| 2000 | Finland | Computer   |        1500 |
| 2000 | Finland | Phone      |         100 |
| 2000 | India   | Calculator |         150 |
| 2000 | India   | Computer   |        1200 |
| 2000 | USA     | Calculator |          75 |
| 2000 | USA     | Computer   |        1500 |
| 2001 | Finland | Phone      |          10 |
| 2001 | USA     | Calculator |          50 |
| 2001 | USA     | Computer   |        2700 |
| 2001 | USA     | TV         |         250 |
+------+---------+------------+-------------+

The output indicates summary values only at the year/country/product level of analysis. When ROLLUP is added, the query produces several extra rows:

mysql> SELECT year, country, product, SUM(profit)
    -> FROM sales
    -> GROUP BY year, country, product WITH ROLLUP;
+------+---------+------------+-------------+
| year | country | product    | SUM(profit) |
+------+---------+------------+-------------+
| 2000 | Finland | Computer   |        1500 |
| 2000 | Finland | Phone      |         100 |
| 2000 | Finland | NULL       |        1600 |
| 2000 | India   | Calculator |         150 |
| 2000 | India   | Computer   |        1200 |
| 2000 | India   | NULL       |        1350 |
| 2000 | USA     | Calculator |          75 |
| 2000 | USA     | Computer   |        1500 |
| 2000 | USA     | NULL       |        1575 |
| 2000 | NULL    | NULL       |        4525 |
| 2001 | Finland | Phone      |          10 |
| 2001 | Finland | NULL       |          10 |
| 2001 | USA     | Calculator |          50 |
| 2001 | USA     | Computer   |        2700 |
| 2001 | USA     | TV         |         250 |
| 2001 | USA     | NULL       |        3000 |
| 2001 | NULL    | NULL       |        3010 |
| NULL | NULL    | NULL       |        7535 |
+------+---------+------------+-------------+

For this query, adding ROLLUP causes the output to include summary information at four levels of analysis, not just one. Here's how to interpret the ROLLUP output:

Other Considerations When using ROLLUP

The following items list some behaviors specific to the MySQL implementation of ROLLUP:

When you use ROLLUP, you cannot also use an ORDER BY clause to sort the results. In other words, ROLLUP and ORDER BY are mutually exclusive. However, you still have some control over sort order. GROUP BY in MySQL sorts results, and you can use explicit ASC and DESC keywords with columns named in the GROUP BY list to specify sort order for individual columns. (The higher-level summary rows added by ROLLUP still appear after the rows from which they are calculated, regardless of the sort order.)

LIMIT can be used to restrict the number of rows returned to the client. LIMIT is applied after ROLLUP, so the limit applies against the extra rows added by ROLLUP. For example:

mysql> SELECT year, country, product, SUM(profit)
    -> FROM sales
    -> GROUP BY year, country, product WITH ROLLUP
    -> LIMIT 5;
+------+---------+------------+-------------+
| year | country | product    | SUM(profit) |
+------+---------+------------+-------------+
| 2000 | Finland | Computer   |        1500 |
| 2000 | Finland | Phone      |         100 |
| 2000 | Finland | NULL       |        1600 |
| 2000 | India   | Calculator |         150 |
| 2000 | India   | Computer   |        1200 |
+------+---------+------------+-------------+

Using LIMIT with ROLLUP may produce results that are more difficult to interpret, because you have less context for understanding the super-aggregate rows.

The NULL indicators in each super-aggregate row are produced when the row is sent to the client. The server looks at the columns named in the GROUP BY clause following the leftmost one that has changed value. For any column in the result set with a name that is a lexical match to any of those names, its value is set to NULL. (If you specify grouping columns by column number, the server identifies which columns to set to NULL by number.)

Because the NULL values in the super-aggregate rows are placed into the result set at such a late stage in query processing, you cannot test them as NULL values within the query itself. For example, you cannot add HAVING product IS NULL to the query to eliminate from the output all but the super-aggregate rows.

On the other hand, the NULL values do appear as NULL on the client side and can be tested as such using any MySQL client programming interface.

12.9.3 GROUP BY with Hidden Fields

MySQL extends the use of GROUP BY so that you can use columns or calculations in the SELECT list that don't appear in the GROUP BY clause. This stands for any possible value for this group. You can use this to get better performance by avoiding sorting and grouping on unnecessary items. For example, you don't need to group on customer.name in the following query:

mysql> SELECT order.custid, customer.name, MAX(payments)
    ->        FROM order,customer
    ->        WHERE order.custid = customer.custid
    ->        GROUP BY order.custid;

In standard SQL, you would have to add customer.name to the GROUP BY clause. In MySQL, the name is redundant if you don't run in ANSI mode.

Do not use this feature if the columns you omit from the GROUP BY part are not unique in the group! You will get unpredictable results.

In some cases, you can use MIN() and MAX() to obtain a specific column value even if it isn't unique. The following gives the value of column from the row containing the smallest value in the sort column:

SUBSTR(MIN(CONCAT(RPAD(sort,6,' '),column)),7)

See section 3.6.4 The Rows Holding the Group-wise Maximum of a Certain Field.

Note that if you are using MySQL 3.22 (or earlier) or if you are trying to follow standard SQL, you can't use expressions in GROUP BY or ORDER BY clauses. You can work around this limitation by using an alias for the expression:

mysql> SELECT id,FLOOR(value/100) AS val FROM tbl_name
    ->     GROUP BY id, val ORDER BY val;

In MySQL 3.23 and up, aliases are unnecessary. You can use expressions in GROUP BY and ORDER BY clauses. For example:

mysql> SELECT id, FLOOR(value/100) FROM tbl_name ORDER BY RAND();


Go to the first, previous, next, last section, table of contents.