<< Back to man.ChinaUnix.net

Chapter 7. rc.d System

Table of Contents

7.1. The rc.d Configuration
7.2. The rc.d Scripts
7.3. The Role of rcorder and rc Scripts
7.4. Additional Reading

As of NetBSD 1.5, the startup of the system changed to using rc-scripts for controlling services, similar to the init-system System V and Linux use, but without runlevels. This chapter is an overview of the rc-system and its configuration on NetBSD.

7.1. The rc.d Configuration

The startup files for the system reside under /etc, they are:

  • /etc/rc

  • /etc/rc.conf

  • /etc/rc.d/*

  • /etc/rc.lkm

  • /etc/rc.local

  • /etc/rc.shutdown

  • /etc/rc.subr

  • /etc/defaults/*

  • /etc/rc.conf.d/*

First, a look at controlling and supporting scripts, also documented in rc(8):

  • When the kernel has initialized all devices on startup, it usually starts init(8), which in turn runs /etc/rc.d

  • /etc/rc sorts the scripts in /etc/rc.d using rcorder(8), and runs them in that order. See the rcorder(8) manpage for more details on how the order of /etc/rc.d scripts is determined.

  • /etc/rc.subr contains common functions used by many /etc/rc.d/* scripts.

  • When shutting down the system with shutdown(8), /etc/rc.shutdown is run which runs the scripts in /etc/rc.d in reverse order (as defined by rcorder(8)).

Additional scripts outside of the rc.d directory:

  • /etc/rc.lkm loads or unloads Loadable Kernel Modules (LKMs), see modload(8) and /etc/rc.d/lkm[123].

  • /etc/rc.local is almost the last script called at boot up. This script can be edited by the administrator to start local daemons that don't follow the rc-concept.

    For example, packages installed pkgsrc usually add their startup files to /usr/pkg/etc/rc.d, and it's left as a decision to the system administrator on enabling them, either by manually copying/linking them to /etc/rc.d, or by adding them to /etc/rc.local. The following is the example from the system for an apache web server added to /etc/rc.local:

    if [ -f /usr/pkg/etc/rc.d/apache ]; then
    	/usr/pkg/etc/rc.d/apache start
    fi

There's a central config file for bootscripts, rc.conf(5) located in /etc/rc.conf. /etc/rc.conf loads its defaults from /etc/defaults/rc.conf, the latter of which should not be touched. In order to alter a default setting, an override may be installed in /etc/rc.conf.

For example, if you wanted to enable the Secure Shell Daemon:

# cd /etc; grep ssh defaults/rc.conf
sshd=NO                 sshd_flags=""
# echo "sshd=YES" >> rc.conf

Or just edit /etc/rc.conf with your favorite editor. The same can be done with any default that needs to be changed. A common sequence often done after installing a fresh NetBSD system is:

# cat /etc/defaults/rc.conf >>/etc/rc.conf
# vi /etc/rc.conf 

Be careful to use “>>” and not “>” else you will destroy the default contents in /etc/rc.conf, which are critical to remain there! After you have copied the defaults that way, modify anything you need to in /etc/rc.conf. Be sure to consult the rc.conf(5) manpage to explain all the settings in detail.

Last and not least, the /etc/rc.conf.d/ directory can be used for scripts-snippets from third party software, allowing setting only one or few settings per file.

7.2. The rc.d Scripts

The actual scripts that control services are in /etc/rc.d. Once a service has been activated or told not to activate in /etc/rc.conf it can be also be modified by calling the rc script from the command line, for example if an administrator needed to start the secure shell daemon:

# /etc/rc.d/sshd start
Starting sshd.

The rc scripts must receive one of the following arguments:

  • start

  • stop

  • restart

  • kill

An example might be when a new record has been added to the named database on a named server:

# /etc/rc.d/named restart
Stopping named.
Starting named.

A slightly more complex example is when a series of settings have been changed, for instance a firewall's ipfilter rules, ipnat configuration, and the secure shell server has switched encryption type:

# sh /etc/rc.d/ipfilter restart
# sh /etc/rc.d/ipnat restart
# sh /etc/rc.d/sshd restart

7.3. The Role of rcorder and rc Scripts

The startup system of every Unix system basically determines the order in which services are started one way or another. On some Unix systems this is done by numbering the files and/or putting them in separate run level directories. (Solaris relies on wildcards like /etc/rc[23].d/S* being sorted numerically when expanded.) Or they simply put all the commands that should be started at system boot time into a single monolithic script, which can be messy. (This is what ancient BSD and NetBSD did before the rc-system). On NetBSD this is done by the rc-scripts and their contents. Please note that NetBSD does not have multiple runlevels as found e.g. in System V systems like Solaris, or Linux.

At the beginning of each of the rc-scripts in /etc/rc.d/*, there is a series of comment-lines that have one of the following items in them:

  • REQUIRE

  • PROVIDE

  • BEFORE

  • KEYWORD

These dictate the dependencies of that particular rc script and hence rcorder can easily work either “up” or “down” as the situation requires. Following is an example of the /etc/rc.d/nfsd script:

...
 PROVIDE: nfsd
 REQUIRE: mountd

. /etc/rc.subr
...

Here we can see that this script provides the “nfsd” service, however, it requires “mountd” to be running first. The rcorder(8) utility will be used at system startup time to read through all the rc-scripts, and determine the correct order in which to run the rc-scripts (hence its name).

7.4. Additional Reading

There are other resources available pertaining to the rc.d system:

  • One of the principal designers of rc.d, Luke Mewburn, gave a presentation on the system at USENIX 2001. It is available in PDF format.

  • Will Andrews wrote a Daemonnews article called The NetBSD rc.d System.