Table of Contents
After installing and rebooting, the computer will boot from the hard disk: if everything went well you'll be looking at the login prompt within a few seconds (or minutes, depending on your hardware). The system is not yet configured but don't worry: configuration is very easy and the approach offered by NetBSD gives you a lot of flexibility. You'll see how to quickly configure everything and, in the meantime, you'll learn how the system works; in the future, in case of trouble you'll know where to look.
If the system doesn't boot it could be that the boot manager was not installed correctly or that there is a problem with the MBR (Master Boot Record). Reboot the machine from the boot floppy and when you see the prompt:
booting fd0a:netbsd - starting in ...
press the space bar during the 5 second countdown; the boot stops and a prompt is displayed. You can have a basic help with the “?” key or with the “help” command.
type "?" or "help" for help.
?commands are: boot [xdNx:][filename] [-adrs] (ex. "sd0a:netbsd.old -s") ls [path] dev xd[N[x]]: help|? quit
The system should now boot from the hard disk instead of the floppy. If NetBSD boots correctly from the hard disk, there is probably a Master Boot Record problem: you can install the boot manager or modify its configuration with the fdisk -B command. See Section 19.3, “Installing the boot manager” for a detailed description.
For the first login you will use the
superuser, which is the only user defined at the end of the
At the password prompt type the password for root that you
have defined during the installation.
If you haven't defined a password, just press Enter.
NetBSD/i386 (Amnesiac) (ttyE0)
password... We recommend creating a non-root account and using su(1) for root access.
The keyboard still has the US layout; if you have a different keyboard it's better to change its layout now, before starting to configure the system. For example, to use the italian keyboard, give the following command:
wsconsctl -k -w encoding=itencoding -> it
See Section 29.1.3, “Keyboard mappings” for a list of keymaps available as well as how to make these settings permanent.
If you have never used a Unix(-like) operating system before, your best friend is now the man command, which displays a manual page: the NetBSD manual pages are amongst the best and most detailed you can find, although they are very technical.
name shows the man page of the
command and man -k
name shows a list of man pages
dealing with “
name” (you can also use the
To learn the basics of the man command, type:
The manual is divided into nine sections, containing not only basic information on commands but also the descriptions of some NetBSD features and structures. For example, take a look at the hier(7) man page, which describes in detail the layout of the filesystem used by NetBSD.
man 8 intro
Manual pages are divided in several sections, depending on what they document:
general commands (tools and utilities), see intro(1)
system calls and error numbers, see intro(2)
C libraries, see intro(3)
special files and hardware support, see intro(4)
file formats, see intro(5)
games, see intro(6)
miscellaneous information pages, see intro(7)
system maintenance and operation commands, see intro(8)
kernel internals, see intro(9)
A subject may appear in more than one section of the manual; to view a specific page, supply the section number as an argument to the man command. For example, time appears in section 1 (the time user command), in section 3 (the time function of the C library) and in section 9 (the time system variable). To see the man page for the time C function, write:
man 3 time
To see all the available pages:
man -w time
man -a time
If you haven't defined a password for
during installation, you should use the
passwd command to do so now.
passwdChanging local password for root. New password: Retype new password:
Passwords are not displayed on the screen while you type. Later we will see how to add other accounts on the system.
The default shell for
root can be
chosen during system installation time, and it usually is
csh; if this
doesn't mean anything to you, you should begin studying csh with
csh(1): it's a good interactive shell
although it lacks history editing (have a look at
tcsh, bash or even the NetBSD
/bin/sh for this).
If you want to change your shell, use the chsh(1) command.
The shells available on NetBSD after installation are:
The new shell will come into effect the next time you login. In the meantime, you can issue the following command if you use csh:
which enables filename completion on the command line (with the ESC key; use Ctrl+D for a list of possible completions.)
You can also install other shells on the system, if you want to: tcsh, bash, zsh and other shells are available in the package collection (which we shall examine later).
If you're familiar with the shell you chose, this is a good
time to create the shell's initialization
NetBSD, like all Unix systems, uses a system clock based on
Greenwich time (GMT) and this is what you should set your system
If you want to keep the system clock set to the local time
(because, for example, you have a dual boot system with Windows
installed), you must notify NetBSD, modifying the
echo kern.rtc_offset=-60 >>/etc/sysctl.conf
sh /etc/rc.d/sysctl restart
The value supplied (-60) is the number of minutes west of GMT.
To display the current setting of the
sysctl kern.rtc_offsetkern.rtc_offset = -60
Now the kernel knows how to convert the time of the PC clock in
the GMT system time but you must still configure the system for
your local time zone (which you will find in the
If you have already done this during the installation you can
skip this step (although it is better to check that the
setting is correct.)
For example, for Italy:
rm -f /etc/localtime
ln -s /usr/share/zoneinfo/Europe/Rome /etc/localtime
Once everything is set up correctly, you can change the time with the following command:
NetBSD uses the
/etc/rc.conf for system
configuration at startup: this file determines what will be
executed when the system boots.
Understanding this file is very important.
contains the default values for a lot of settings, and
to override a default value, the new value must be put into
/etc/rc.conf: the definitions there override
the one in
should stay unchanged).
/etc/rc.conf file is
very important. The rc.conf(5) manual page contains a
detailed description of all the options.
The first modifications are:
(this modification might already have
been done by the installation software.)
to configure your system's network using DHCP.
to start the Secure Shell server daemon upon system
Define a hostname for your machine (use
a fully qualified hostname, i.e. one including domain).
If you have a standalone machine you can use any name (for
If your machine is connected to a network, you should supply
the correct network name.
Make sure that the hostname is resolvable, either using
/etc/hosts; some programs
do not work with an unresolvable hostname.
This might be a good point to enable soft-dependencies for FFS
filesystems. By default NetBSD writes FFS meta-data synchronously, which
means that meta-data is written to disk immediately. Soft-dependencies
is a mechanism which does not write meta-data immediately, but it
is written in an ordered fashion, which keeps the filesystem consistent.
This provides performance comparable to asynchronous mounts, without
the same risks. Soft-dependencies can be enabled by adding
softdep to the filesystem options in
/etc/fstab. Let's look at an example of
/dev/wd0a / ffs rw 1 1 /dev/wd0b none swap sw 0 0 /dev/wd0e /var ffs rw 1 2 /dev/wd0f /tmp ffs rw 1 2 /dev/wd0g /usr ffs rw 1 2
Suppose we want to enable soft-dependencies for all filesystems,
except for the
/ partition. We would change
it to (changes are emphasized):
/dev/wd0a / ffs rw 1 1 /dev/wd0b none swap sw 0 0 /dev/wd0e /var ffs rw,softdep 1 2 /dev/wd0f /tmp ffs rw,softdep 1 2 /dev/wd0g /usr ffs rw,softdep 1 2
These are some references for more information about filesystems and soft-dependencies:
In this first session you have:
Configured the keyboard
root password (optional)
root's shell (optional)
Changed the system time and the RTC offset
Defined the local time
Now it's time to reboot the system, with the following command: